Schlagwort-Archiv: Bondage

Mr S Bishop Head Harness

Von | | , ,
8 Kommentare

Vendor: Mr S or Regulation

The Mr S Bishop Head Harness with Eye and Mouth Cover Attached

The Mr S Bishop Head Harness with Eye and Mouth Cover Attached

I have long wanted to review this toy but since it is so complex to describe the construction I always chose something different to review despite being one of my favorite bondage toys. But since it is my birthday today I sat down to treat you to this review.

Construction

Before I talk about the construction a short word about measurements: Because there are no less than 6 straps with roller buckles and a Velcro patch it is almost impossible to talk about sizes because if you fasten one strap it naturally affects the other. I have tried out this head harness on subs with really small and really large heads and really beefy necks and it fit everyone.

The Mr S Bishop Head Harness without Any Attachements

The Mr S Bishop Head Harness without Any Attachements

The bottom of the head harness is a double layer of thick, yet soft leather which forms a collar. Onto it a strap with a roller buckle and three welded D-rings are riveted under thick saddle leather. Into this double leather layer the face mask part of the harness is sowed. It is made out of soft garment leather. While the part covering the neck and the chin is a single layer of leather, the part covering the face is also lined with garment leather. The face mask is roughly triangular shaped. On its ends it has another saddle leather strap with a roller buckle riveted onto it. At the end of this part and the collar a 90mm by 50mm patch of industrial grade Velcro is sowed for a firm and precise closure. The central part has an opening for the mouth and the nose with snap buttons around. Onto the lower ones you can put a through 2 roller buckles adjustable double layer garment leather strap. On it you can put one of two leather patches that come with the head harness. Both are made out of saddle leather lined with garment leather. One is just the patch with riveted loops to put on the strap, the other featured a pecker gag like their lockable gag. The upper 6 snap fasteners are for a triangular eye cover. The face masks runs out into a long leather strap onto which 4 other straps with roller buckles are sowed. Through these 4 straps you adjust the head harness so that it fits tightly on the sub’s head.

Detail of the later Added Loop

Detail of the later Added Loop

An alteration I had made on my head harness is a patch of double layered garment leather which a local leather shop riveted on middle of the strap running over the head. Under this flap I can put a shackle as an added bondage point. I strongly believe that the guys at Mr S can do the same thing if you want it.

Playing with it

There are two components which makes this head harness an awesome toy. First there is the sensual aspect of this toy: As I have written almost two years ago kneeling in front of a top and having the straps fastened around your head is a very intimate experience and a great way into the scene.

Detail of the Welded D-Ring

Detail of the Welded D-Ring

Once this is done, soft leather is hugging the sub’s face and the rich intoxicating scent of leather envelopes him. But in order to create this great experience it takes a lot of practice and experience how to fasten the straps in order to get tight and symmetrical without having to try and undo them too often.

Detail of the Two Straps with Roller Buckels on the Collar

Detail of the Two Straps with Roller Buckels on the Collar

After having experienced the sensual experience of having the head harness put on and just being in it, it is now time to start playing with it. First there is the bondage feeling around the head. It is not as strong as a full mask you get laced into but still the pressure of the individual straps can be felt to create a tight bondage sensation. This is good especially for a bit claustrophobic people where a full mask would be too much. If you don’t tighten the straps too much the more “airy” feeling and appeal is good newbies who would also be overwhelmed by a full hood. Also in the lighter/ newbie section belong the eye cover and the gag. While the cover does block the sub’s sight and the gag it good for chewing on and kind of hard to spit out, they are more a psychological support of a scene than made for heavy play. If you want the real deal (total darkness or a thigh, secure gag) I recommend to look at the reviews of the Ultra Blindfold or the Lockable Gag both from Mr S. A nice psychological touch I am missing is that there is no locking option for the collar straps. For real bondage aficionados knowing that they are inescapable locked into bondage gear is a great mind fuck.

Detail of the Roller Buckle of the Straps which wrap around the Head

Detail of the Roller Buckle of the Straps which wrap around the Head

Detail of the Pecker Gag Stuck Through the Mouth Hole Showing the Inside Leather Lining

Detail of the Pecker Gag Stuck Through the Mouth Hole Showing the Inside Leather Lining

With three D-rings the head harness it has ample anchoring points for a leash or attaching mitts or restraints. While the rings are tempt to be used for binding down the sub I would not advise it because there is a chance that the subs will strangle himself. Because of this I had the loop on top added. If you use the collar as an anchoring point make sure that the top of the head is even bound harder to when the sub tries to get up his head is stopped before he chokes on the collar. Another interesting way of using this head harness for bondage is attaching ropes to the four straps around the head and tying them to a bondage frame so the sub can’t move his head. It takes a bit of practice and time but the one sub which I witnessed being bound like that was entering bondage bliss after he realized that he can’t turn his head.

Conslusion: The best head harness I have yet played with
Pro Cons Where to get Price
Many different sensations Difficult to put on and adjust Mr S (Manufacturer) $379.95
Three D-Rings  No locking collar straps Regulation £389
Very versatile
High material & build quality

 

HML Velcro Leather Hand Restraints

Von | | ,
2 Kommentare

Vendor: HML

Construction

The HML Velcro Leather Restraints with a Welded Stainless Steel D-Ring

The HML Velcro Leather Restraints with a Welded Stainless Steel D-Ring

I have gotten this pair of wrist restraints from the guys from HML to give them feedback on their latest design.

The wrist restraints are made in the same fashion like their electro ball stretcher being made out of one piece of high quality cow nappa leather folded towards the middle thus there are no sharp edges on the sides. What sets this bondage toy aside from other restraints is the workmanship and the closing mechanism: Instead of a buckle they have a 15mm and wide strap of industry grade Velcro sowed onto a 30mm wide leather strap. The piece of male Velcro is 100mm long while the female is 150mm long. Also besides the welded stainless steel D-ring there is not metal used to make these restraints. A tight and very precise stitching ensures sturdiness and reliability even when playing hard.

Detail of the Male and Female Velcro Straps

Detail of the Male and Female Velcro Straps

Due to the compact closing mechanism and the width of approx. 52mm they are very compact so they even fit in tight toy containers. They come with a 70mm long and 6mm thick steel chain hook which is a nice touch.

StitchingPlaying with it

I have seen a number of leather restraints with Velcro as a closing mechanism. The Velcro is often used as an inexpensive closing mechanism on entry-level restraints. And while this model is also the entry model of the HML restraint range they feel very sturdy thus performing very well in fettering a sub. In fact the piece de resistance of this bondage device is the closing mechanism: It is the nature of Velcro that is can be adjusted very precisely leading to a very tight bondage feeling for the fettering aficionado. On the other side of the experience spectrum I made very good experiences using this toy on a bit scared subs who are new to this kind of play. In their mind just pulling on the Velcro strap to open them is a quicker and easier way to get them out compare to having to open a buckle. An aesthetic problem that doesn’t affect the play is that there is no loop to hold the loose end of the strap.

DiameterTrust is also something the top has to develop towards this toy. When the sub struggles in these restraints the Velcro makes creaking noises and on several occasions I fear that they would open up. But even when playing with a strong ex-military sub they withstand the fight against them.

In order to keep them from accidently opening during a scene I would advise to always use the entire length of the male strap leading to a minimum diameter of 50mm and a maximum diameter of 68mm. So these restraints fit small to larger wrists. They even fit small ankles but are not really made for this restraining situation. Maybe HML can make ankle restraints by commission. But HML carriers a matching collar either with a D-ring or an O-ring.

Conslusion: The best restraints for over-head suspension I know and a great substitute for wrist cuffs
Pro Cons Where to get Price
Easy handling No ankle restraints available HML 49,90€
Precisely adjustable A bit too small diameter range
Welded D-ring

 

Mister B Spank Ties

Von | | , ,
Ein Kommentar

Vendor: Mister B

The spank ties twisted for maximum delivered impact

The spank ties twisted for maximum delivered impact

Construction

This toy is basically an 80cm long and 1,5cm thick rod. In its core is a bendable spring which will take and hold nearly every shape you twist it into. This spring is covered by soft, charcoal colored padding. On the end there are black plastic hemispheres so there are no sharp edges.

This toy is sold in pairs.

Playing with it

Like the name implies this is a dual purpose toy: It can be used for bondage and for impact play.

The biggest problem of this toy in both usage situations is the handling: It takes a lot of practice until you can bend this toy in the desired form because the spring is rather stiff. This of cause has the advantage that the ties will stay in the shape once bent.

Ties twisted around furniture ready for attaching a sub.

Ties twisted around furniture ready for attaching a sub.

However once you mastered this toy it is a quite nifty bondage device. You fold the rod in the middle and twist it around a rail (a bed post or shower handle for example), than you place the wrist of the sub onto the twisted part and twist the rod again two or three times tightly enough that the hand cannot slip through the loop. It takes a bit of practice to find the right technique to make these twists soling and inescapable but it is worth the effort. I usually have a pair of these with me when I am on business trips because I can ties someone onto furniture in a hotel room without having to carry around large quantities of rope or leather restraints. I especially like tying someone to shower rails (Please check if the rails can handle a wiggling sub without getting ripped out of the wall before you tie someone to them!) because if you tape off the gap between the padding and the hemispheres the ties are waterproof. Of cause the bondage aspect is not limited to attaching subs to furniture. You can also twist cuffs, cockring-ballstretcher-combos and many other things out of these ties.

Detail of the plastic hemispheres for a more stingy sensation.

Detail of the plastic hemispheres for a more stingy sensation.

When being used as an impact toy you need to adjust your play style a bit: Since the core is flexible a lot of the movement energy is lost in the deformation. So I enjoy using this toy especially for beginners either as a straight rod for “caning” or when folded twice or thrice as a “paddle”. For added stability and thus more impact delivered onto the sub’s body fold the rod in half and tightly twist both ends around each other. Since most of the mass of this toy is padding the sensation is still more on the thuddy side. But especially if you hit sensitive body areas like the glans or the nipple with the plastic hemispheres this toy has quite some bite.

Conslusion: Very versatile toy, excellent for travelling but a bit hard to handle.
Pro Cons Where to get Price
Dual purpose Difficult to handle Mister B 23,95€
Versatile spanking toy
Small & handy

Blackstyle Mouthopener Gag

Von | | ,
Einen Kommentar hinterlassen

Vendor: Blackstyle

The Blackstyle Mouthopener Gag

The Blackstyle Mouthopener Gag

Construction

This gag is made out one piece of 1.4mm thick rubber. With a recess for the nose the main body of it is shaped ergonomically so it can be worn even by people with smaller heads without any problems. In the middle of the main body a quite sturdy rubber covered tube is glued. It has an external diameter of 44mm, an internal of 39mm and goes 32mm into the mouth of the sub. The strap is 30mm wide and ends in a roller buckle which is hold in place by a rivet. On the other side 6 rivet reinforced holes are punched into the strap allowing the circumference to be adjusted between 44cm and 54cm. The part of the strap holding the buckle as well as the area with the holes has been cut in the half, reinforced with fabric taped and glued together again.

Detail of the Roller Buckle with reinforced Holes

Detail of the Roller Buckle with reinforced Holes

Playing with it

Two major forms of play are possible with this gag: First of all the tube makes it ideal for forcing the subs to take substances into his mouth. Most obvious are spit and piss. But when you hold the subs nose and insert larger quantities of water the gag can be an interesting (and dangerous!) torture instrument. Secondly because of the large object being present in the sub’s mouth it encourages the body to produce saliva so it is a good gag for drooling. Depending on the sub’s salvia production and the amount of evaporation through the tube wearing this gag for an extended period of time can be an interesting swing of sensations between drooling and having a dry mouth. Don’t forget to rehydrate your sub when engaging into this form of play.

Detail of the Fabric Tape reinforced Rubber

Detail of the Fabric Tape reinforced Rubber

The third can be a problem or rather a trade-off lying in the nature of this gag: Because the tube has to be solid and a somewhat considerable diameter in order to fulfill its purpose it can be weary tiring to the jaw to wear this gag. This effect can be lessened a bit by training but please bear in mind that not every sub’s jaw is made for serving as a urinal for an entire night. However if you are into stress bondage this might be the gag to get.

Conslusion: Good all rubber gag for forcing subs to consumes substances
Pro Cons Where to get Price
All rubber Quite large tube diameter Blackstyle 49€
For a rubber toy quite sturdy design

 

Mr S Rubber Ball Gag

Von | | ,
Einen Kommentar hinterlassen

Vendor: Mr S

The Mr S Rubber Ball Gag

The Mr S Rubber Ball Gag

Construction

The main body of this ball gag has roughly the shape of a wrapped hard candy: The mouthpiece has a diameter of 42mm and a length of 49mm. It ends on both sides in triangular flaps so there is little stress on the corners of the mouth when wearing the gag. Onto the flaps the strap is riveted. It is 18mm wide, can be adjusted between 45cm and 55cm circumference and is made out of Mr S’ soft oil tanned leather like this ball stretcher. A nice tough are the pieces of leather covering the back side of the rivet. This minimize the contact between the rubber and the metal and absorb a bit of draft put in the rubber thus keeping it from overstretching.

While last week’s mouthpiece was on the firmer side the mouth piece of the rubber ball gag is quite soft and easy to bite into yet firm enough that you can rest your teeth comfortably on it. It is covered in rubber so it has no problem with saliva or piss. Despite being sturdy 1mm thick rubber I would recommend not using this gag if you have any sharp edges on your incisors.

Detail of the Leather Reinforced Rivet

Detail of the Leather Reinforced Rivet

Playing with it

I got this gag during my trip to San Francisco in May 2013. I had the intention of buying the deluxe ball gag in the world and ended up buying this one despite the other one being an awesome ball gag!

Through the reviewing process of gags I found two types of gag users which I like to call bounds and biters. The bounds enjoy the feeling of something solid in their mouth. They want the feeling of their mouth being in bondage and thus a too soft material isn’t doing the trick. Biters on the other hand have a more practical approach: They enjoy the functional value of a gag (like silencing or drooling) but when they want to sink their teeth into something that gives in. Sadly gag, especially ball gags, with a soft mouth piece are hard to come by. Since I belong to the latter group I choose the rubber ball gag over the deluxe ball gag.

Detail of the Buckle with the Oil Tanned Leather Strap

Detail of the Buckle with the Oil Tanned Leather Strap

From a functional point of view this ball gag performs great: The mouth piece is firm enough to let your teeth rest on it comfortably and “encourages” drooling, yet soft enough to enable a satisfying bite. This gag come sadly only with a one size fits all mouth piece. It fits most people but for people with smaller mouths it has a bit of a stress bondage aspect despite being soft and for larger mouths it can feel lost a bit.

Because the strap is mounted on the far side of the flaps the gag can be worn for extended periods of time without any problems. This is also largely due to the softness of the leather which hugs almost hugs onto the skull. From a practical point of view the rubber is easy to disinfect and because the flaps go way over the corners of the subs mouth the leather won’t come into contact with saliva.

Conslusion: Good, low maintenance ball gag with soft mouth piece
Pro Cons Where to get Price
Soft mouth piece with right degree of firmness Only one size Mr S $39
Comfortable to wear for long periods of time
Easy to clean

Mr S Fetters Front Buckle Gag with Locking Buckle

Von | | ,
3 Kommentare

Vendor: Mr S

Construction

The Mr S Locking Front Buckle Gag

The Mr S Locking Front Buckle Gag

The main body of this gag has roughly the shape of a stretched octagon with small recesses for the nose on the long sides. The inside of the body is made out of thick and soft padding covered with soft leather. In the middle of the inside there is a mouth insert which is 5,5cm long. It has roughly the shape of a penis with a “glans” diameter of 3,7cm and a “shaft” diameter of 3,2cm. My version of the gag has a rather firm yet very biteable version of the mouth insert. I had longer owned gags in my mouth and they had softer mouth inserts. I don’t know if this is a thing that comes with time or if Mr S changed the production process. Both hardness grades were comfortable to wear and to bite into. The outside of the body is made out of thick yet soft leather onto which two leather loops are riveted. Through these loops runs a long, 2,7cm wide thick leather strap. The punching allows for a diameter between 33cm and 60cm so it should fit almost all head sizes. At the end of the strap there is a locking roller buckle which makes closing the gag quite easily.

Playing with it

Gags can have different purposes: Make the sub drool, keep his mouth open or muffle the noises he makes. This gag is made for the latter and performs fairly at it. When fastened tight onto the mouth the padding absorbs quite some noise. But like every other gag I have put into people mouth or had in my mouth this is not a silencer but the best performing gag yet (even better than a butterfly gag). Also the padding makes the gag quite comfortable when pressed onto the face so it can be worn for extended periods of time.

Detail of the Penis shaped Mouth insert and the soft Padding

Detail of the Penis shaped Mouth insert and the soft Padding

What sets this gag aside from other ones are the small and clever details. The obvious one is the front locking buckle. For most subs it is a great mindfuck when you show them the lock and then put it into the buckle. They know that there is no way they are going to articulate, drink or even breath through their mouth until the master permits it. Especially the last constraint comes in handy when you want to do breath play: When tightly fastened sucking in air will only result in sucking the gag closer to the mouth so when you keep shut the sub’s nose there is no way he can breathe.

The mouth insert has as mentioned about roughly the shape of a small (?) penis. I have seen several subs who when going down into sub space started sucking on it which adds just a bit more to the scene. From a practical point of view the larger diameter of the glans gives the teeth a bit more support and keeps the gag in place which is good for longer scenes.

Detail of the Locking Roller Buckle

Detail of the Locking Roller Buckle

From a practical point of view this gag is ideal when you suspend a sub who is lying on his back: With the buckle on the front the can be undone and fastened without any problems even with a tightly bound sub.

Besides the play aspects this gag has also some fetish benefits for the leather lover. On the one hand there is the intense leather smell when wearing the gag. Mr S only uses high quality hides and them being pressed onto the subs face directly under his nose exposes him to the great, intoxicating leather scent of them. On the other hand (no pun intended) the soft garment leather above the padding almost feeling like a leather gloved hand pressing over your mouth. If you are a fan of Glover over Mouth play, this is definitely the gag to get!

Conslusion: The best silencing leather gag I know off
Pro Cons Where to get Price
Quite silencing Mr S $89.95
Comfortable to wear for extended periods of time
Great leather quality
Lots of fetish potential
Pratical

 

Mr S Four Buckle Hand Restraints

Von | | ,
5 Kommentare

Vendor: Mr S

Construction

The Outside of the Restraints

The Outside of the Restraints

Describing the shape of these restraints is a bit hard. A piece of padding covers everything from the front of the palm, the back of the hand down to way below the wrist. To make wearing the restraints more comfortable and enabling holding onto something there is a padding going between the thumb and the forefinger thus you have a left and a right restraint. The padding is 16mm tick, very soft and covered in soft either black or grey leather. Onto the part which goes over the palm four sturdy straps out of 3,5mm thick belt leather are riveted. Into the straps are enough holes punched to enable enclosing even very large hands. Fastening them is made easy due to the rolling buckles which are equipped with pointed pins so they go into the holes more easily. Each restraint has two D-rings: One on the palm side hold in place by a leather loop embossed with the Mr S logo and one attached just behind the buckle of the upper strap going around the wrist.

The Inside of the Restraints lined with the soft padding

The Inside of the Restraints lined with the soft padding

As always with Mr S the metal work is superb: Solid welded D-rings are hold in place by sturdy rivets so these restraints will withstand even the heaviest of play.

Playing with it

The Back of the Restraints with all four Buckles fastend

The Back of the Restraints with all four Buckles fastend

The construction of these restraints is ideal for any fixation with the hands above the head. When using the D-ring on the palm side the draft of the fixation pulls on the entire restraints evenly instead of pulling one side up and shifting the entire restraint like when using a cuff-style restraint with D-rings on the side. Furthermore the two lower straps support the wrist in staying upright even when the sub clings to the restraints when standing on the tip of his toes. This support is vital to prevent at best tiring out the joint or cutting circulation, at worst injuries from happening. Due to this property I highly recommend these restraints when attaching the sub to a St. Andrews cross. I especially recommend them for flogging: In order to relax the muscles of the upper back the upper arms should be in line with the shoulders like when tied onto a Latin cross. But when adding a bit of rope between the upper eyebolt and the palm side D-ring you can achieve that position on a St. Andrews cross.

The Front of the Restraints when worn

The Front of the Restraints when worn

What this restraint isn’t made for supporting your entire body weight! Of cause when tightening the straps firmly (for potential risks see last paragraph) your hand will not slip out of the restraint. But the draft will apply pressure from below on the hand bones which can cause injuries. Also due to the force the shoulders have to deal with in this stress position there is a higher risk of dislocation. If you want to suspend someone into the air for a short period of time, attach the restraints to a sturdy spread bar the sub can hold onto. For an extended period of time add at least a pair of padded foot suspension restraints (and better even add a waist belt) and always be aware of the threat of suspension trauma.

Detail of the Roller Buckle

Detail of the Roller Buckle

But these restraints are not only good for suspending someone standing up quite straight. They are also ideal for “traditional” bondage when lying down. Especially when you like to tie your subs into a spread eagle the palm side D-ring helps distribute the draft better than a traditional leather cuff. If you are a bondage enthusiast who enjoys the feeling of heavy and tight bondage gear these restraints I recommend them as a substitute for cuff-style wrist restraints. I had boys getting a boner just from the feeling of the four leather straps being tightened around their hand. Once fastened using both D-rings on anchor points in different moving dimensions will limit the movement of the hands quite strongly. Sadly these restraints don’t have at least one locking strap which would have added to the overall feeling of being caught in them.

The Mr S logo emobssed on the loop holding the front D-Ring

The Mr S logo emobssed on the loop holding the front D-Ring

How long these restraints can be worn depends on the form of the restrained hands and how tight you fasten the two upper straps. Since the tissue between your thumb and your forefinger is soft and gives in easily fastening the strap running between these two fingers too strong can cut the circulation. A similar yet not as extreme effect can happen with the strap running across the hand. Usually the thick padding prevents this from happening but if you want a really tight feeling of your hand being bound by leather be prepared that after some time restraints will have to get loosened.

Conslusion: The best restraints for over-head suspension I know and a great substitute for wrist cuffs
Pro Cons Where to get Price
Comfortable to wear even in stress position Risk of cutting circulation when fastening too tight Mr S $179,95
Intense feeling of being restrained Not locking
Two D-rings
Great build quality

Stylefetisch Leather Straps

Von | | , ,
Einen Kommentar hinterlassen

Vendor: Stylefetisch

Construction

Detail of the Roller Buckle

Detail of the Roller Buckle

Today I am basically reviewing leather belts. So the basic construction is fairly simple: It is a 35mm wide and 4mm thick strap made out of black, fine grained leather. You can get in various lengths; the ones I have gotten are 130cm, 120cm and 110cm but I guess you can also get them shorter. It features double punching starting approx. 18cm behind the buckle, each hole being reinforced by rivets. The spacing between the holes is 30mm so the belt can be adjusted quite finely. The buckle is a two-thorn roller bucket which makes closing and opening the belt easy.

Detail of the double punched strap

Detail of the double punched strap

Playing with it

I consider this type of toy a playroom essential because it comes in handy in so many situations: Tightening a bit too loose sleep sack, adding straps to a spanking bench, tying someone to a bondage table or a pole. Since these restraints are not padded I would only use them on areas which are naturally well padded like thighs, ass or the upper back. If you want to tie joints like the wrist or ankle down, make sure they are protected, p.e. through a pair of boots or thick gloves or use other, traditional padded restraints. Of cause for all these situations you can use rope but frankly for 4€ a piece, having some of them at hand when you need something quick is a wise investment in my opinion.

Conslusion: Basic and inexpensive dungeon essential
Pro Cons Where to get Price
Inexpensive No substitute for normal restraints Stylefetisch 4€

Bon4 Metal Chastity Cage Regular

Von | | , ,
2 Kommentare

Vendor: Mister B

The Cage locked with a 51mm Ring attached

The Cage locked with a 51mm Ring attached

Chastity is one of the big things in (gay) BDSM. Handing over the control of one’s dick and orgasms to a top is one of the biggest sacrifices a sub can do without interfering too much with his day to day schedule. This is what makes chastity devices so intriguing.

Despite its popularity I haven’t done a chastity device review yet. I owned two: A CB6000 and a cheap steel one. The first was too small for my soft dick, the second had too sharp edges and without a proper and in-depth testing I am not writing reviews. So I was pleasantly surprised when Mister B sent me the new Bon4 Steel Chastity Cage size Regular to review. And I was more pleasantly surprised when I found out that it actually fits my soft dick.

Detail of the Locking Pin with Pad Lock

Detail of the Locking Pin with Pad Lock

Design

The construction of this chastity device is fairly standard besides its being made out of brushed stainless steel. There is a cage which is connected to a ring behind your balls which keeps it from falling off. The cage is approx. 8,5cm long with a diameter of 3,7cm for the shaft and approx. 5cm for the glans. Between the cage and the ring there are two pegs with 1,2cm length to keep both parts at a comfortable distance and adding up to a total usable length of 9,7cm. The chastity device comes with four rings with the following diameters: 39mm, 44mm, 47mm and 51mm. With this variety the device should fit most dicks. If you have a smaller one you can always take a look at the small version for 149€.

The device has a few unique properties due to the material. The rings have a hinge at the bottom which makes putting it on quite easily. I have also heard a lot of reports from friends who’s dicks broke plastic/ silicone chastity devices over time due to material fatigue. This is defiantly not going to happen with this device. The build quality of the toy I have gotten is superb but if there should be any rough or uncomfortable spaces the toy comes with a little sheet of fine sandpaper and tape to mend these spots. There is also a small lock in black bag the toy comes in.

Playing with it

Detail of the hinged ring

Detail of the hinged ring

It is kind of hard to write this section. The chastity cage isn’t really a toy, it is a control device made to be worn 24/7. With the high build quality and the material which will withstand moisture and physical stress the Bon4 Metal Chastity Cage is up to the challenge. But in the end more than even any piece of gear it has to fit perfectly to fulfill its purpose. A too loose ring and you can get out of it easily or it will simply fall off when walking. A too tight ring will make wearing it for a long time uncomfortable or can even cause damage to your genitals due to cut circulation. So even more than with other toys I urge you to try it out if it fits you. If you have problems with the ring sizes Bon4 offers addition ones with 36mm and 56mm diameter. The lock is quite a high quality one but still it is more a psychological barrier for the sub. A skilled lock pick will sooner and a desperate sub will later figure out how to open it with a pair of paperclips. For checkable security I recommend using numbered plastic locks.

One of the greatest problems with chastity cages is hygiene. Most devices only have small holes for pissing and some for water because materials like plastic doesn’t allow for bigger ones without compromising stability. Yet again stainless steel doesn’t have this problem so the case basically consists out of holes with some beams which makes hygiene not problem. You simply shower wearing the cages and you are all set. The material also opens the door for some torture possibilities. Since metal picks up temperature quite easily most subs fund mild ice and fire play… interesting. And I probably don’t need to tell you that steel is conductive. Of cause there is a downside: The metal makes the cage way heavier than the plastic ones. My testees had very different opinions on that topic: Some found it uncomfortable, some loved the constant pull and movement on the balls.

Everything you get when you order the Bon4 Metal Chastity Cage

Everything you get when you order the Bon4 Metal Chastity Cage

Afterthought

This review covers only the “technical” aspects of the Bon4 Metal chastity cage. Chastity never has quite been my kink, partly because I was frustrated with the cages not fitting my dick. I also didn’t find the thought of handing control of my dick over to a top tempting. For this review I have worn the device on and off for a couple of days and was genuinely impressed how much I liked it. Yet a true long term test has yet to be done. A top friend of mine has challenged me to a week of chastity which will begin this Sunday. You can expect a small blog entry every day about my experiences and problems with the cage. But a week doesn’t say much about true long term usability. I have been looking for a sub to be locked up for quite some time and as soon as I have found one and put into the device for an extended period of time there will be a follow-up review.

Conslusion: High quality and robust chastity cage
Pro Cons Where to get Price
High build quality Heavier than other chastity devices Mister B 159€
Regulation £ 119,99
Sturdy material Can be a bit more visual under the clothes than other devices
Good hygiene

 

665 Leather Neoprene Sleep Sack

Von | | ,
2 Kommentare

Vendor: Mister B

Construction

Front of the Sleep Sack

Front of the Sleep Sack

The sleep sack is made out of charcoal colored 2,2mm thick neoprene. The color sparked some debate under my testees: some liked the modern, sleek accent to their playroom, others said that the non-black color broke the all-black scheme of their playroom. I like the color but have to admit: despite the subtle tone it does „pop“ in an all black environment. The neoprene pieces are sewed together by sturdy black threat in cross-stitching. Unlike neoprene gear made for water sports the seams are not welded so they are not waterproof. Same applies to the zipper. There are three of them: one from YKK from the neck to mid-chest for easy entry, one above the dick and one above the ass from unknown manufacturers. Both these zippers have a small piece of neoprene covering the zipper from the inside so neither skin nor hair gets caught. Inside the bag there are sleeves for the arms which are closed on the end so the sub can’t touch himself. Around the neck hole there is a soft collar made out of black cloth.

Soft Collar around the Neck

Soft Collar around the Neck

Size wise this sleep sack is a bit tricky: I have got the XL version which is made for people between 176cm and 186cm height, a 112cm to 117cm chest and a 89cm to 97cm waist. I am 1,89m tall and am neither especially beefy nor chubby and still I just barely fit in it. Because XL is the largest size (but they go down to a tiny S) the person you want to put into it shouldn’t be too large.

Playing with it

The right Arm Sleeve for an intense Bondage Experience

The right Arm Sleeve for an intense Bondage Experience

If I am informed correctly this is the most inexpensive bondage bag on the market so if you are doing kinky on the budget and want the tight total bondage or neoprene all-over experience this is the toy to get (for the total neoprene aficionado and/ or total immersion bondage fan 665 Leather also makes a neoprene bondage bag with attached hood for $485). A snug tight fit comes through the stretchiness as a material property of neoprene. This of cause means that the sub inside can wrestle and work out pain a bit more easily compared to a leather sleep sack. In order to prevent this from happening you can either do a rope harness over the bag (which looks especially hot when using a contrast rope color) or add belt-like straps like from Stylefetish (I have been waiting for these straps to arrive in time for posting this review but sadly they didn’t. I will post a small review of them as soon as they arrive and I can put a sub into them). For most bondage boys this added layer of restraining is a great turn-on.

Detail of the Chest Zipper and the Stitching

Detail of the Chest Zipper and the Stitching

The zippers grant access to all important play areas but the nipples. A bit problematic is the lack of some form of cloth your can pull out from below the zipper on both sides to cover the zipper because the stretchiness of the material tends to pull the two sides of the open zipper together. This can be a problem for the top when while fucking the sub the zipper teeth can irritate his dick skin or for the sub when his junk is taken out for being played with. At least for the sub most of the time putting on a Oxball Nuttsling p.e. will do the trick protecting the skin around his penis root. Nevertheless the stretchiness can also be an advantage: putting nipple clamps is a bit difficult but once they are in place they stay in place even when the chest is already moist or the sub wiggles around. If you can fuck or enjoy fucking somebody while he is in the sleep sack is a very personal thing. All but one top didn’t like „humping a plank“ but the one loved the objectification of his fuck toy.

The Zipper over the Ass with the protective piece of neoprene

The Zipper over the Ass with the protective piece of neoprene

As mentioned above: the body bag is not waterproof. While I have not seen liquids leaking out off the seams the zippers above the ass is a problem. Because neoprene isolates so well this sleep sack is great for all kind of temperature scenes (please always monitor the hydration and overall body temperature of your sub!) or playing in chillier surroundings where a latex sleep sack would be too cold. But at some point the sweat will leak out of the rear zipper so put a towel under it. For anything nastier like letting the sub inside for so long that he pisses himself the sleep sack isn’t really made for. So either diaper up the sub or put the sleep sack on a surface which can be soiled by body fluids.

Conslusion: The best masturbation device I have come across yet.
Pro Cons Where to get Price
Tight when even not M2M Not waterproof Mister B 259€
Inexpensive No skip protection at zippers 665 Leather (Manufacturer) $199
Access to genitals and ass
Not available in really large sizes
Closed arm sleeves