Recon Leather Ball Stretcher

Vendor: Recon

Construction

The Ballstretcher with Divider in the smallest Adjustment

The Ballstretcher with Divider in the smallest Adjustment

After having covered Mr S’ ball stretcher range the last two weeks today I am going to take a look at the most basic ball stretcher from Recon which I have got in the 5cm width. The stretcher itself is made out of two layers of leather: The outer is a stiff, almost cardboard like leather, the inner is a soft one. Due to this construction all metal parts are making skin contact again bringing potential allergic problems. Three snap buttons hold the stretcher in place, sadly there is only one diameter adjustment for 3,7cm.

The 1,9cm wide divider has the same basic construction: the stiffer leather on the outside, the softer leather on the inside. It is hold in place by three black rivets on the wider part and through the three snap buttons you can have three different length settings: 9cm length with 4,1cm space between the rim of the stretcher and the divider, 10cm and 4,8cm and finally 11cm and 5,7cm. There is a not welded d-ring which freely runs along the divider. On the one hand this is handy because you can put it for bondage purposes on the front or back of the balls but on the other hand it can fall off the divider (which to be honest is unlikely because it would have to get over the three female parts of the snap buttons).

Playing with it

In order to play with this toy you need a fairly large scrotum. Because the leather is really stiff this stretcher isn’t really forgiving lengthwise. If it fits really well (or even a bit loose) it is comfortable to wear for some time, but if it fits tightly or as soon as you add 250g of weight the hard edge will start to hurt and irritate the skin. Due to the divider allowing for quite large settings this toy is made for people with REALLY large balls or people into pumping/ saline play.

The only Diameter is 3,7cm

The only Diameter is 3,7cm

Playwise the same things can be done than with the Mr S one (which I will mostly just copy and paste for your convenience):  Because the d-ring is in the middle the pull of weights is directly downward and is felt more on the individual balls than on the sack itself. When you start moving the weight, p.e. when wanking, is will start to swing freely and will gather moving momentum which will increase the pull on the balls. Of cause you can use the d-ring as an anchor point for carabineers again. I particularly had fun attaching it tightly to the end of my shoulder-to-wrist-restraints.

The divider offers some interesting possibilities for CBT. It makes targeting single balls more easily like for attaching single electrodes (fried eggs anyone?), individual pressure or hitting (my favorite for this is a riding whip). Another cool thing which I enjoyed very much is sensation play: Cool one ball with ice and drop wax on the other.

Conslusion: A basic, inexpensive ball stretcher for large balls with inferior leather
Pro Cons Where to get Price
Incredible inexpensive Inferior Leather Recon  (Manufacturer) 5cm: £47,5cm: £510,5cm: £6
Doesn’t collapse easily Hard edges
Divider suitalbe for REALLY big balls Only one diameter adjustments

HML Electro Ballstretcher

HML Electro StretcherThe last two weeks I have been talking about ball stretchers and will continue the next couple of weeks. But D-Rings and dividers are not only the only extras you can put onto a ball stretcher: This one from HML has both of the features and two electrodes to fry your balls. The thought of weight pulling down and swinging on my balls while they are zapped or setting the weight in motion by the shocks is really tempting. And 24,90€ for a leather ball stretcher with divider, a d-ring AND electrodes is a fair price.

 

Reader Request and Site Housekeeping

As promised earlier this year I made some requested design changes: All old articles have gotten a new layout for a more attractive appeal and easier access to the pictures. Also, the conclusion box is back but without points in different categories. Instead the conclusion, pro and cons and where to get is put in a more structured way. The look of the box isn’t final yet but it is an improvement over the old style. Also after some requests I have where possible incorporated links to other big stores (until now Mister B for Europe and Mr S for the USA) where you can get the product from. With toys which are made by a big kinky manufacturer like Oxballs this is easy because the products I reviewed are the exact same in every store. Other toys, like the Clover clamps, can come from other manufacturers with different feather pressure, etc. So the link to the product I am actually reviewing is marked as “manufacturer” even though the store in most cases doesn’t really produce the toy themselves. A request I haven’t really figured out yet how to implement in a lucid way is to tag articles by which stores sells which toys For a little more comfort when browsing for toys from a certain store there now is a spreadsheet on the “Review” landing page where you can browse the reviews by manufacturer/ store, category and toy name. Sadly my WordPress theme still messes with the layout and the drop down boxes don’t work yet. Last but not least: I have finally put content on the FAQ page. If you have any other questions you think others also want answered feel free to send them to me and I will post them.

I have also gotten a couple of mails asking me to review some more basic and inexpensive toys. As most of the time I listen to my honored readers. Some of you might have already noticed the last two weeks I have been publishing reviews of ball stretchers and there are still some reviews to come. In my opinion ball stretchers are an essential and inexpensive toy so I hope you are happy with this little series even though I have to be honest: At the moment I am looking forward to test and review other stuff than ball stretchers right now. So I am hoping you are as excited as I am about the other great toys I will review in the not too distant future.

Mr S Ball Stretcher with Divider

Vendor: Mr S

Construction

Oil Taned LeatherUnlike last week’s stretcher this one is made out of a single 3,8cm wide piece of leather which Mr S calls oil tanned. Despite being nearly 2mm thick is it very soft and has smooth edges making it comfortable to wear. The comfort has the downside that this stretcher isn’t as stiff as others thus the stretch will not as strong as other stretcher with the same width. Also due to only using a single piece of leather the metal is able to make contact with the skin which can be a problem with people being allergic to certain metals. The stretcher is closed with a pair of snap buttons with the Mr S logo on them. You can choose between a diameter of 3,4cm and 2,7cm.

Logo Snap ButtonsThe divider strap is made out of trifolded garment leather and 1,9cm wide. Two rivets attach it to the wider part and there are two snap buttons which allow a divider length of 6cm with 2,5cm space between the rim of the stretcher and the divider strap and 5cm length with 1,2cm. On top of the divider is a not welded d-ring which is hold in place of a strap of trifolded garment leather two rivets. The space between the rivets is large enough so that the d-ring can move into the middle of the divider on both length settings.

On Mr S’ website this toy is still shown with three snap buttons above each other and thus a larger divider strap. When I was at their store in May 2013 they told me that they only make this two in the width I am owning it. This isn’t necessarily a bad thing because the stretch is comfortable for all people who tried this stretcher on. However the divider strap was too short for all but one. Apparently Europeans have larger/ meatier balls. Please keep in mind that the stretcher and divider will be shorter than shown on your website when considering this toy.

The two Divider adjustments

The two Divider adjustments

Playing with it

This section is a bit hard to write because most of my testees couldn’t try out the full potential of this stretcher. As a simple leather ball stretcher it is the best I have got for long-term wear (even more comfortable than the Mr S one with a D-ring I reviewed last week) because the soft leather will more easily adjust to tighter balls. But as written above the divider sadly was too small for nearly all my testees and me. So I have to rely on a single report here.

Left: 3,4cm diameter Right: 3,7cm diameter

Left: 3,4cm diameter
Right: 3,7cm diameter

Of cause you can do everything with this d-ring as with the one last week. The weight sensation will be a bit different. Since the d-ring is in the middle the pull is directly downward and is felt more on the individual balls than on the sack itself. When you start moving the weight, p.e. when wanking, is will start to swing freely and will gather moving momentum which will increase the pull on the balls. Of cause you can use the d-ring as a anchor point for carabineers again. I particularly had fun attaching it tightly to the end of my shoulder-to-wrist-restraints.

Detail of the Divider with the D-Ring on top

Detail of the Divider with the D-Ring on top

The divider offers some interesting possibilities for CBT. It makes targeting single balls more easily like for attaching single electrodes (fried eggs anyone?), individual pressure or hitting (my favorite for this is a riding whip). Another cool which I enjoyed very much is sensation play: Cool one ball with ice and drop wax on the other.

Conslusion: A great ball stretcher with a lot of play potential – if the divider is large enough
Pro Cons Where to get Price
Comfortable to wear for a long time Only come on one width Mr S (Manufacturer) $39.95
Great workmanship Metal is making contact with the skin
D-Ring D-ring is not welded
Good value for money Divider strap is too short

 

 

Mr S Ball Stretcher with D-Ring

Vendor: Mr S

Construction

StretcherThe stretcher is made out off a trifolded soft 3,8cm wide leather. The folding has a number of advantages: First through the three layers and the seam in the middle the leather is stiff enough and doesn’t collapse easily to provide a good stretch and yet is flexible enough to be comfortable to wear. Second through the folding the edges form a smooth piping on one side; on the other side there is a piping and an edge which doesn’t irritate the skin too much due to the soft leather. A third advantage would be that all metal parts could be covered with leather making it safe for allergic people to use. But for this toy Mr S decided to put the counter parts of the rivets through all three layers which at least robust them sturdier. As always with leather toys from Mr S the stitching quality is top of the notch.

In order to adjust the stretcher there are two pairs of snap fasteners leaving you with three diameters to adjust the stretcher: 4,3cm, 3,8cm and 3,1cm. A nice touch is the Mr S logo on the outside of the snap buttons.

Diameter from left to right: 4,3cm, 3,8cm and 3,1cm

Diameter from left to right: 4,3cm, 3,8cm and 3,1cm

A nifty feature of this toy is the small d-ring which is a hold in place by two rivets and double layer leather strap. Sadly the d-ring is not welded as which is the case with most other small d-rings.

Detail of the trifolding with "loose" end on top

Detail of the trifolding with „loose“ end on top

Playing with it

The toy is good at everything what a ball stretcher should do: It stretches your balls to make them bounce around when walking, fucking or jerking off, prevent that your balls get closer to the body when you come which intensifies the orgasm and keeps your ball in place and offer an easy way to grip them when they get spanked. And because the leather and workmanship is such high quality you can wear the stretcher for an extended period of time. One of my test person wore it for over a day.

Detail of the D-Ring

Detail of the D-Ring

What sets this stretcher aside from a standard one is the d-ring which is not attached to a divider so if it is not used it doesn’t get into your way. The obvious thing to do with the d-ring it to attach a weight. Because the d-ring is not centered you can create two different sensations: When you put a barrel-shaped weight on front off the stretcher it beats your balls; when you put it on the back the feeling of weight pulling on your balls is even more intense than with a centered one. As with standard restraints the d-ring can be used for all kind of bondage purposes: Either attach a leash, use it to tie the sub down to the bed, nipple clamps, the spreader bar or any pair of restraints attached to the legs so there is a small reminder that there is something around his ball with every step the sub takes. When doing this please keep in mind that the d-ring is not welded. When too much force pulls in opposite directions on the d-ring there is a chance that it will come open.

The Mr S Logo Snap Buttons

The Mr S Logo Snap Buttons

Sadly Mr S seems to have stopped making this great ball stretcher but I believe if you ask them nicely they can still make you a custom one.

Conslusion: Good standard ball stretcher with a nice added feature
Pro Cons Where to get Price
Great quality leather and over all workmanship Metal is making contact with the skin Mr S (Manufacturer) Out of Production, last known price $18
D-Ring D-ring is not welded
Can be worn for an extended period of time Only comes in one width
Good value for money

 

 

E-Stims System Mirco, Classic Medium and Magnum Medium Bipolar Plugs

E Stim Electrodes

Vendor: E-Stim Systems

When I started purchasing electrodes for my E-Stim box a good friend and top of mine recommended the bipolar ones from E-Stim Systems. Knowing that my anus isn’t really trained I started off with the Classic Medium but soon purchased the Micro and the Magnum Medium to have a bit more of a choice when tormenting mine or other people’s asses.

Because the electrodes are quite similar I decided to review them all at once and go into detail about the individual differences in the play section.

Construction

All electrodes reviewed in this article are from their premium range, meaning they are made out of stainless steel with high quality plastic as insulator. Due to the high quality and robust materials the electrode will probably outlive you. And if it doesn’t E-Stim Systems has a lifetime guarantee for their premium electrode.

A disassambled Magnum MediumThe plugs are made in a five-piece constriction: First there is a stainless steel base with a plastic inset. Through this inset a stainless steel screw put which first goes through a black (in case of the Mirco white) barrel shaped piece of plastic and is finally screwed to the head. There is a 4mm drilling hole at the bottom of the base and the screw where you put standard 4mm banana plugs in order to connect the electrode with your e-stim box. When cleaning your electrode after playing simply take out the cable, disassemble the electrode and wash it with warm water using soap.

Bottom view with 4mm Drilling HolesThe stainless steel surfaces comes in a standard brushed finish which gives it a very sleek, modern and sleek appearance. When you order the electrodes directly from E-Stim’s website you can also order all electrodes in a polished version for a 10% premium. It is hard for me to recommend a surface treatment: As a jeweler sales assistant I know that a polished surface won’t show scrates as easily as a brushed one (If you are interested to know why, send me an e-mail), but personally I prefer the look of the brushed stainless steel. And if you are not ordering your toys directly from their website you will most likely only have the option of getting the brushed finishes.

Mirco Classic Medium Magnum Medium
Head & Bas Diameter 25mm 25mm 38mm
Head Length 19mm 36mm 91mm
Base Length 30mm 41mm 26,5mm
Neck Length 2,5mm 35,5mm 19,5mm
Overall Lenght 51,5mm 112,5mm 137mm
Neck Diameter 14mm 16mm 20mm
Difference between Head and Neck Diameter per side 5,7mm 4,7mm 9mm
Distance between Drilling Holes 6,5mm 6mm 9mm
Weight 82g 140g 331g

Playing with them

First a advice how to read this section: I will only discuss how the physical properties influence the sensation. The sensation itself depends very much on your e-stim box and the program you select.

When choosing the right electrode before play there are two important things to keep in mind:

  1. Standard and Low Profile CablesThe Material: Unlike other soft materials like vinyl or silicone most anal toys are made out off stainless steel will not yield! So if you can barely fit a 38mm vinyl plug into your ass taking the Magnum Medium for example will at least take some training.
  2. The Handling: A lot of people put condoms over their anal toys when switching partners. The condom’s latex layer will at best alter the way the current flows thus might produce unwanted effects, at worst no current will flow at all. But because the stainless steel is easily cleaned and disinfected this isn’t a big issue if you clean your toy thoroughly after using it on one partner. When it comes to lube I would always recommend water-based lube. The glycerin in the lube will help the current flow from the metal to the skin. A thick layer of silicone lube can produced unwanted effect.
    There are specialized electro lubes out there but in my opinion they are overrated. For my sessions I use Swiss Navy water based lube. It keeps it gliding properties for a long period of time and transmits current very well.

Generally speaking when it comes to electrodes: The larger the mass and the contact area the “smoother” the sensation will be. Furthermore you will only feel the sensation at the pole with the lower mass which isn’t important for bipolar electrodes because most people can’t tell if the electro sensation is on the inner or outer side of their anus.

In order to insert an electro plug warm it up a bit up to body temperature, plug in the cables, put some lube only on the head of the electrode and gently push it into your anus. Because unlike other bipolar electrodes the base and the head is connected by a solid connection pushing it in is easy. Now connect the cable to your electro box and start the stimulation. Each of the three plugs produces a different sensation:

  1. The MicroThe Micro: Through its small size and short neck the Micro sits directly on your sphincter and only stimulates there. The small mass results in a fine line between interesting and unique buzzing feeling directly inside your anus between a challenging and also unique torture of this body part. But the size is also a problem: When your ass can take dildos from 3cm diameter on or if the Micro is lubed very well it will almost instantly slip out of your ass. I would advice maintaining light pressure on the electrode until you sit or lie down.
  2. The Classis MediumThe Classic Medium: Through its size it is easily inserted even into untrained asses. The even mass distribution between neck and head and larger mass compared to the Mirco results in a wider range of pleasurable experiences when turning up the power. The pièce de résistance of the Classic range are their three different lengths: When sitting on it, it will press onto your prostate. You just need to find the right length.
  3. The Magnum MediumThe Magnum Medium: Through its big mass the sensation feels smoother and a bit more even than the previous two ones. Of cause you need more power from the box to produce the same stimulation level. I wouldn’t recommend this electrode for a box with a low output. Through its size and weight in addition to the electro sensation you get a feeling of fullness inside your rectum. While walking the mass will develop some moving momentum and will most likely hit your prostate which has its own appeal.

Low Profile Cables pluged into the MicroE-Stim Systems claims on their website that none of the electrodes I own are designed for low profile cables. I have made my own low profile cables and the fit without a problem on the Mirco and the Magnum and with a bit of pressure on the Classic. If you want to sit on or lie down while using the electrode you need low profile banana plugs so you need to try out which works best for you.

Low Profile and Standard Cables plugged into a Magnum Medium and a MicroOf cause you can use the electrode also as a monopole. Just plug one banana plug into the anal electrode and the other one onto another electrode, a pin wheel or a rubber loop for example.  Another usage for the electrodes is using them as standard stainless steel plugs for long term wearing. Because the connection between the head and the base in not flexible you will probably get tired of wearing it sooner than when wearing a plug with a flexible connection.

Conslusion: High quality and versatile plugs not only made for e-stim.
Pro Cons Where to get Price
Micro Classic Medium Magnum Medium
Easy to insert Graduation between electrodes is fairly coarse EStim Systems (Manufacturer) £42 £44 £69
Robust Hard to disassemble when screwed on tightly Mister B 68€ 76€ 119,95€
Lifetime guarantee          
Easy to clean          
Good looks          

E-Stim Systems 1 ¼ Inch Flanged Bipolar Electrode

Mock Up Electrode compared to exising Products

This is a first time in the desiderate section: I am not only wanting a specific toy, I am (hopefully) helping designing one. As you can read here I am a big fan of the E-Sim System’s premium bipolar electrode. They are comfortable to wear and will probably outlive me.

Outline of 1,25 Inch ElectrodeBecause E-Stim Systems is based in the United Kingdom they use the imperial measurement system thus their products come in sizes 1”, 1,5” and 2” (and of cause much, much bigger). At least in my opinion this leads to very big gaps between the different sizes: While a n electrode with a  1” diameter is easily inserted (and most likely will as easily fall out again), one with a 1,5” diameter is for people with an untrained anus already a struggle, especially when it comes to Flanged series which has dull heads.

I have always liked the concept of their flanged, easy to sit on electrodes, especially in combination with a remote controlled box. But all electrodes in the range were either too small (the difference between the head and the neck with the Flange is so little it will most likely fall out of your ass when you walk) or too big. So I am hoping that in some point of time they will start manufacturing a 1 ¼” electrode: Not too big to cause any bigger problems when inserting but with a large enough difference between the head and the neck to walk around freely without having to fear approx. 220g of Steel falling out of your ass. In the end it is in your hands to get it into production: I have talked to the guys at E-Stim Systems. If enough people demand a product they will put it into production.

How Mister B brightened my week

As a marketing person I have been taught to never start a message with a negative statement. But today I somehow can’t do anything else: My week has been shitty so far. On Monday I fell down some stairs on campus and have to walk on crutches. Holding on crutches while standing in a crowded metro probably made me an easy victim because in such a place my smartphone and a set of expensive and very dear to me pens were stolen out of my pocket on Wednesday.

Mister B Medical Padded Leather CollarDespite the theft I went to Demask with a friend of mine in order to look for a collar for him. He decided to go for a custom black version of the Mister B Medical Padded Leather Collar because he wanted a locking buckle. When leaving the shop I saw the Mister B beanie hanging behind the counter. I wasn’t really in the mood for any further browsing even though I need a new one so I didn’t ask for the price.

Mister B Boot BagMister B Gym Sack used as Sneaker BagToday I went on Mister B’s website and discovered they have updated their entire signature line. For some time I have been using two of their gym sacks for keeping sneakers or dildos together in my suitcase or as a light and small bag for an essential selection of toys to carry around in clubs. I tried carrying around boots in them twice. Sadly they are not big enough for 20 hole rangers and the rivets aren’t really designed to hold such weight. Mister B Gym Sack used as Dildo BagSo with great delight I found out that Mister B now has a dedicated boot bag. I haven’t any measurements and they won’t arrive at Demask until next week but I from the pictures I believe that the bag can hold a pair of cross boots or two pairs of 20 hole rangers. I will update this page next week when I have taken a look at the bag itself.

Mister B Messenger BagBasically the same thing applies for their new messenger bag. For some time I have been looking for a smaller alternative to my large ones when I just need to carry around a tablet, a sketch book and a bottle of water. It looks rather small so I am not sure if it will hold everything I need but I am definitely excited about a kinky branded bag.

Shirt BackFinally I probably have just been blind but did Mister B update their shirt line? I’ve never seen someone wearing it with a large logo on the back. I am a big fan of shirts with prints on the back. Might just put a size L in black on my birthday list.

 

 

 

 

For those who are wondering when the next review will be up, I am thinking about Sunday and I am thinking about to review my three bipolar electrodes from E-Stim Systems.

E Stim Electrodes

On Trying to Order a “custom” Surf Suit from Rubber Bob

The first piece of rubber I ever got was a size M surf suit from Blackstyle. When I got it, it fitted quite ok but over the last 2 ½ year I got a bit beefier around the chest and shoulders and sadly a bit wider around the belly. I also got used to color on my latex pieces and since an all-black cat suit as a basic piece is planned to come in 2014 I decided to get myself a new surf suit.

With money being a bit tight as a student (I know I should spend less on toys and more on gear) I looked for alternatives to the great yet more expensive German manufacturers. Rubberbob.co.uk was recommended to me by a bunch of my British Twitter followers. They told me he made basic pieces in good quality for great prices. When I first visited his website I was kind of… surprised by the layout and product pictures. Apparently the website is 13 years old. But if the quality of his products is up-to-date I do not really care about the business’ public appearance. Clicking through his offering I found that surf suits are called “Andy Style” and that you can e-mail them for custom modifications. So I got in touch with him in late October asking about a surf suit with a yellow zipper, two yellow stripes and yellow piping in 0.6mm black latex. As expected due to his focus on basic pieces the colored zipper and the piping weren’t possible. Due to the upcoming Christmas season I didn’t pursue getting a new surf suit any further.

On Wednesday I had a friend over for tea, put him into my rubber surf suit and he loved the look and the feel of rubber yet didn’t want to spend as much on his first piece as I did. Meanwhile I made plans to attend a rubber U35 piss party at the beginning or March in Karlsruhe which gave me a reason to get a new surf suit. So today I got in touch again with Bob this time asking if I could get two yellow stripes on the side and 5 instead of 3 runners on the zipper. He replied that the suit is made out of 0.45mm rubber, only comes with one yellow stripe and that no additional runners can be added. Since runners are easily added in Germany and I can live with one stripe I inquired if I could get the suit made out of 0.6mm rubber for of cause a higher price. He replied that he wishes me best of luck in finding a manufacturer that would match my requirements which left my kind of puzzled: Maybe I am spoiled by the waste amount of options I get offered for example when I am at RubAddiction, Rubber Factory or Blackstyle but simply taking a thicker rubber sheet and charging more for it is in my opinion not a crazy or difficult to fulfill task. So in the end I will probably keep my Blackstyle surf suit or turn to China and see if they are as good or as bad (depending on the source) as the internet claims they are.

Unser WordPress soll schöner werden

For the last couple of month I have been running tests and collecting feedback from selected readers about the design of the website. The main points of criticism were:

  • Due to the static welcome page new content is hard to find
  • The category landing pages are just ugly
  • The way pictures cramped at the top of the articles look bad
  • The light box is not working properly
  • Especially in longer articles the layout could be better

Embarrassingly I had to agree to all points of criticism. Most of them were due to me not being able to deal with WordPress correctly. As you might have seen from today’s posting I have started addressing them and spent some time last week finding plug-ins that work for me in order to make the articles more attractive. Over the next couple of weeks there will be some additional changes to the website. And MAYBE (that is a big maybe) the comment function will be reactivated. So stay tuned and check back on ToyTorture.com in a couple of days.