Kategorie-Archiv: Home

The Mr S Leather Vector Heavy Padded Bondage Sleeves

Vendor: Mr S Leather

Design

Mr S calls this toy “Bondage Sleeves” but I  would find the term “Straitjacket Sleeves” more appropriate because that is what this toy is: The sleeves of the Vector Straitjacket I reviewed last week combined with a harness to tie them to the body.

The harness looks like a hybrid of a Bulldog and a Y harness. In the front there is a 14cm long horizontal piece of leather with a D-ring in the middle. The O-rings left and right of this leather piece is housing each a belt going over the shoulder and a belt going under the shoulder around the back. Connecting both belts using the roller buckle which is riveted on one of them will fetter the harness to the sub’s body. The belts going over the shoulder connect to an O-ring by two roller buckles riveted with leather loops to it. A 6cm long vertical piece of leather connects this O-ring to another one. This O-ring is the anchor point for the two belts onto which the sleeves are attached.

Detail of the 3 D-rings on the Sleeves‘ Side

The sleeves are basically like the ones on the Vector Padded Straitjacket from Mr S: Unlined leather sleeves with thick foam padding sown on the upper and lower arm and an unpadded elbow to allow the arm to bend. On the sides of each sleeve there are three D-ring riveted to the body using the same soft and sturdy bridle leather the belts are made out of. The bottom of the sleeve looks like his big brother: Left and right D-rings, roller buckle in the middle to connect both them. They have an internal length of 76cm and a circumference of 65cm so even beefy bodybuilders should fit. Speaking of fit: Unlike last week’s straitjacket, this is a one-size-fits-all piece of gear. But the belt going around the back has a total length of 110cm, the belts to connect the sleeves with the harness can add another 25cm to the internal length so there is plenty of space for beefy and thick bottom boys wearing this piece of bondage gear. This adjustability is a true feat for tops that play with subs of different body types!

The Harness for Fettering the Sleeves to the Body

The Vector Sleeves come with the same amount of straps as the Vector Straitjacket: A 76cm long one with only holes to connect the sleeves, 6 traditional belts with roller buckles (2x 85cm and 4x 60cm) and a 4x 60cm and a 23cm long piece with roller buckles on both ends. This allows for the same two basic bondage layouts: Either use a belt to tie both sleeves folded in front of the torso together and connect to the front D-ring or threat a belt through the D-rings at the sleeve’s bottom and tie them around the thighs.

After all this years, I guess I do not have to write too much about the Mr S’ leather quality: Both the garment and the bridle leather is soft, yet sturdy and smells great.

Detail of the D-ring housing

Playing with the Vector Padded Bondage Sleeves

Since the design of this toy is so close to a straitjacket, bondage-wise is almost works like one. When the arms are folded in front of the body and adding the vertical belt for added restrictiveness, the bondage degree is a little bit lower because the belt is only attached to one instead of two D-rings. But luckily a stainless steel cockring can easily be used as a second anchor point. Naturally, also the feeling of leather tightly hugging the torso is not there.

But that is not scenario for which you would buy this piece of bondage gear. If you want that, buy a straitjacket! There are three major scenarios for this toy: First, it is for people who want to show off year gear. Especially at bars or street fares, some tops want their subs to display what they are (not) wearing while still securing them tightly. Related to this scenario are subs who easily overheat. For these people layering up by putting a straitjacket over their gear is not an option. There are even people like a close friend of mine who even when just lying bound in a normally heated room cannot have a long-term bondage scene in a straitjacket because he gets too hot.

Detail of the Connection Between Harness and Sleeves

Finally and probably most importabtky, there is the (almost) full body access appeal of this toy and personally I fall into this category. While last week I wrote that the Vector Padded Straitjacket is the best straitjacket I have ever played with, I use the Vector Sleeves way more often in scenes! My testees and I had scenes involving sensation play, knife play or even flogging which are usually not associated with the bondage level straitjackets of. There even were some wax play scene though it is only for experienced/ really masochistic subs. In order to limit the chance of wax hitting the leather, the drop distance should be relatively low which means the heat increases dramatically. Naturally, nipple access if way better than on a traditional straitjacket and since there are not straps below the chest, CBT, fucking and fisting works without a problem. There is a final, a bit borderline target audience: Fursuiters into bondage. The plush fursuits are made out of is often so thick would make a separate straitjacket for fursuit bondage necessary (not beginning to talk about the heat problems there…). And I have not even started with fur getting caught in zippers or Velcro. The large body size range these Vector Sleeves cover makes them ideal for capturing anthropomorphic subs.

The Sleeve Ends with Roller Buckle and Two D-rings

While its big brother has 19 D-rings, the sleeves “only” have 9. This difference may sound drastic, but 9 are ample in most situations.  Regardless if standing in a bondage frame, tying the sub to a pole or spread eagle on a bed, there are enough anchor points to fetter the arms and upper torso properly. For added bondage, simply thread rope of tensions straps through the O-rings. Though if you need to tie the lower torso, you will need a bondage belt. Since the D-rings are on the outside of the sleeves they can easily be tied tighter to the torso by threading a belt through them.

The Mr S Leather Vector Padded Straitjacket

Vendor: Mr S Leather

Design

Like all straitjackets the basis of this piece of bondage gear is a unlined leather “jacket” with extra-long, closed sleeves. The jacket opens at the back and is closed using industrial strength Velcro. The frontab, the upper and lower arm are heavily padded with thick panels of v-shaped stitched down, leather covered foam cushions. Left and right of the padding run each a 15cm long lateral zipper (in size M) for nipple access.

To fasten the straitjacket tightly onto the sub’s body, there are 5 bridle leather belts with roller buckles on the back. For added security, there is another belt around the collar and onto the bottom of the jacket two belts are riveted. These go around the thighs and through the crotch. For securing the arms, there are roller buckles at the end of each sleeve. The jacket comes with a 76cm long belt only with holes to connect those two. To keep the arms in place there is a pair of D-rings between the padding on the front. Use one of the additional belts (2x 85cm, 4x 60cm and a 23cm long piece with roller buckles on both ends) that come with the straitjacket to fasten them to the front. At the end of the sleeves there is a D-ring left and right of the roller buckle. When you thread a belt to those two and fasten it around the thigh, the arms can be tied down parallel to the torso.

The Array of D-rings on the Side

Speaking of D-rings there are a lot on this straitjacket. Like, really a lot! There are three around the collar, the two in the front, two at the end of each sleeve, three on each side of the jacket. Onto the jacket body is a 6.5cm wide piece of folded garment leather sown. Being thinner it is a bit softer than the jackets unlined leather. So if you thread a belt through the pairs of D-ring on each side, it tightly closes around the body. All D-rings are securely housed under straps of bridle leather, attached to the body using sturdy rivets.

Like all products leaving the workshops from Mr S, the leather is top notch. It is soft, has a beautiful grain, subtle light shiny luster and smells deliciously! Despite all these “cuddly” attributes, the leather is heavy duty and means business! The belts are strong enough to rein in even the strongest sub.

The Velcro Strap for Closing the Straitjacket

Since Mr S manufactures all their gear in-house in San Francisco and has a custom department, you can always literally tailor the straitjacket to your own demands. This starts with simple requests like needing a smaller or larger size or stitching colors and goes over colored leather (a friend got this straitjacket with red leather covering the padding) to complete design modification. I’ve done smaller modification on other toys in the past (had I but world enough for ALL my kinky dreams…) and they are extremely kind and helpful. They put all their expertise and experience into getting you the gear you want. But be prepared to wait a bit for the finished product to arrive.

The Straps on the Back to Tightly Fasten the Straitjacket Around the Body

Playing with the Vector Padded Straitjacket

Let’s start out this part of the review with the only big point of discussion among my testees: The way you close the straitjacket. About 60% of the people that played with the Vector straitjacket would have preferred a zipper closure. Closing a zipper gradually increases the level of restriction and a good zipper can take a bit of struggle. So once the jacket is zipped up a bit, the restrictive feeling kicks in. With the strap of Velcro you need a still standing sub to align both sides properly. Don’t get me wrong: The wrong, the Velcro is industrial strength and once closed can absorb a lot of force. But you need a sub to willingly submit to get into this straitjacket. As this is how I play with my subs, the Velcro did not bother me but apparently it is something to think about before choosing this straitjacket.

The Thigh Strap

That being said, the Vector Padded Straitjacket passed with flying color! It is actually the best straitjacket I ever played with. The thickness of the leather and the padding strikes the right balance of being comfortable over extended periods of time and intense feeling of bondage. Once all the belts are fastened, the leather wraps tightly around the body. The belts are 35mm wide, so when they are being pulled tight through the roller buckle, the pull force is transferred onto a large body area. Since there are so many belts to close, putting the straitjacket on has a great sense of drama, feeling how the ability to move is taken away while the soft leather hugs the skin increasingly tightly. This makes this straitjacket a treat for every leather fetishist. The thick hide with the massive, stainless steel trims add up to a weight of almost 5kg! Wearing this straitjacket wears you down in a good way. It feels solid, heavy, restricting and that’s what a good piece of heavy body bondage should do.

The Sleeve Ends with Roller Buckle and Two D-rings

When you have read other reviews from me, I usually say “More D-rings are better!” But the Vector Padded Straitjackets features a total of 19 D-rings! Yes, I can think of borderline situations where more D-rings would be useful and I have thought “Oh, a D-ring on the shoulder or the elbow would have been nice.” But thus discussion is academic! The many D-rings are enough for almost every bondage situation, regardless if lying down with the arms folded in a sling, tied a spread eagle on a bed, fixed to a pole or in a bondage frame. The strong way the D-rings are attached to the straitjacket comes in handy especially when the sub is standing up. If using strong enough fettering mediums like rope, industrial tension straps or chain, the sub can lean into the D-rings and the straitjacket will support him.

The Zipper for Nipple Access

Play access to important body parts is good with the Vector straitjacket. Like all belts, the ones running through the crotch are soft and have been thoroughly deburred. So even fetter the straitjacket onto bare thighs, the leather will not cut into the skin or cause friction burn when moving quickly. So the dick and balls can be carelessness exposed for CBT or a top must not worry about discomfort when fucking or fisting his bound boy. The nipple access is as good as you would expect. Since it is only a straight zipper in a rigid material like leather, the opening extends only so much. In most cases the nipples below were in reach and clamps or even suction cups could be applied easily. But it is definitely too tight for wax play or extended licking and biting. For this kind of play, you need a straitjacket with tit flaps! All that things being said, it is still the padded straitjacket with the best tit access.