Archiv für den Autor: Frederik

Vendor: Mr S

The Mr S Shoulder to Wrist Restraints

Construction

The first element of this three-part bondage toy is a 32mm wide latigo leather strap which runs over the neck and around the shoulders. It is closed by a roller buckle and can be locked through a post. There is also a D-ring next to the roller buckle. The strap’s length can be adjusted between 110cm to 140cm which is long enough for beefy subs; the buckle’s pin has to be in the third hole for the last hole to fit over the locking post. For fettering an extremly beefy body builder meat machine Mr S can certainly make a custom strap which is longer but neither my testees nor me ever found the strap too short respectively too long for skinny subs.

On this strap runs a 380mm long and 53mm wide latigo leather strap. Between 45mm to 225mm measured from the bottom 12 holes are punched into it. For an even tighter bondage experience I had 6 holes added so the restraint can be pulled up even higher.

Detail of the Roller Buckle, Locking Post and D-ring of the Shoulder Strap

These holes are used to attach the 53mm wide latigo leather back strap using a roller buckle with a locking pin. Below the roller buckle there are two wrist restraints riveted onto the strap. They are closed with locking roller buckles.

Playing with the Shoulder to Wrist Restraints

The possible usage scenario is determined by how much the shoulder and the back strap are tightened. If both straps are not too strict this restraint can be used for self-bondage. It takes some time and practice to get the wrists fettered and undone again. But the latter struggle is part of the self-bondage experience. If you should fail to undo them there is enough slack to cut the back strap with a safety scissor in a case of emergency. If both straps are tightened in a medium intensity (elbow forms a right angle) the restraints can be worn comfortably and safely for an extensive period of time. This makes the Shoulder to Wrist Restraints the ideal piece of bondage gear for social settings like a bar night. The sub is bound into a presentable position yet he is able to move around to follow his top while the bondage is comfortable enough to be kept on for an entire nights.  In the tightest configuration on tall guys it becomes impossible to open the wrist restraints even when they are not locked.

Detail of the Wrist Restraints

Almost regardless of the tightness the Shoulder to Wrist Restraints create an interesting bondage experience. Especially in the looser configurations the bondage feeling of the wrist restraints quickly fade away. So when the sub wants to act naturally because he forgot about the restraints he will quickly be reined back. A big advantage of the Shoulder to Wrist Restraints is the effective bondage in combination with great accessibility: With the arms bound behind the back nipples and the junk can easily be played with and his torso is exposed for (gut) punching; once bend forward for a spanking the ass cheeks are exposed and the sub can’t raise himself again so he is at the top’s mercy.

Detail of the Back Strap attached to the Runner

To intensify the bondage experience I recommend attaching a shackle to the strap of the lower wrist restraint between the two rivets. Onto this new anchor point ankle restraints can be added – either with chains to create a prison setup to limit the sub’s ability to run or just with carabiners to keep him kneeling. For a more painful sensation connect the wrist restraints to a ball stretcher with a D-ring or – even more evil – a parachute with spikes. If pain is induced and he tries to work it out with whatever limited movements he has in his arms he will tug on his balls.