Massage Flogger

Bare Leatherworks Massage Flogger

Vendor: Bare Leatherworks

Construction

The basic design of this flogger is fairly standard: One side with tails, other side handle. But that’s all that is standard about this toy. Instead of having a bunch of tails, this one only has 6 which are made out of soft and medium heavy bull-hide. They are 50mm wide and about 530mm long in full (or rather standard flogger tail length) size and 350mm in the medium size (for playing in more confined areas or using this flogger primarily on subs on spanking benches). I intentionally write “about” because on my flogger there was a difference of 9mm between the longest and the shortest tail! For a “normal” flogger, this would serious impact the play experience. But being a “massage” flogger you do not really just target with the tail tips but with the full length. The tails fixed to the handle by just putting a screw through them in the middle which is a “quick & dirty” way to make a flogger which in the end enables the rather low price.

Detail of the Rubber-Wrapped Handle

The handle is made out of wood with a “bulges” (the cover material not being plaited you cannot really call them knots) on both ends for a secure and comfortable grip. Despite the heavy tails, this flogger is extraordinarily well balanced! The center of mass lies right between the end of the grip section and the beginning up the upper bugle. Looking at my collection of 10 floggers this is the most balanced flogger I own!

The handle cover is quite unique: Instead of being covered in an elaborate plaited multi-color leather pattern, a long strap of industrial rubber is wrapped around and fixed buy multiple black screws in stainless steel grommets. The rubber provides a good and secure grip even with sweaty hands. So from a functional point of view, nothing speaks against this method and it safes a lot of time, material and money (thus the very competitive price). But as someone who sees a flogger also as a piece of craftsmanship and handcraft tradition, this flogger looks a big “basic” (or as another testee put it “Bad-ass Mad Max”-like…). At the bottom of the handle, an eyebolt is screwed into the wood. Through it two intertwined leather straps are threaded for a wrist or storage loop. This loop looks so “artistic” and lavish that it is a steep contrast to the rest of the rather “basic” flogger design. Not that I would mind…

Detail of the Eyebolt and the intertwined leather loop

For an extra $10 you can get the “Pro Grip” handle. When choosing this add-on, a thick wire that runs in a spiral beneath the rubber cover. This adds texture to the gripping surface. I tried the Pro Grip at Spexter in Munich years ago and found it too uncomfortable for my size 7½ hands. So I ordered this flogger with a standard grip. In the review process, I never felt that even in heavy scenes that I needed extra grip when throwing this flogger. Naturally my testees could not compare both handle types. But even the tops with the sweatiest hands never had gripping problems. In addition, none of the Bare Leatherworks impact toys I have come across in scenes over the last 5 years had the Pro Grip. Another possible add-on for $14 is adding two more tails for an extra powerful thud!

Free of charge is customizing the colors of the tails. You can choose between black, red, blue, purple, grey, green, white, yellow and pink and have different colors for the inner and outer tails.

Playing with the Massage Flogger

Usually, I am very skeptical when tails are just screwed to the top of the handle instead of carefully arranging them in a woven knot for optimal flying capabilities. But the Massage Flogger flies really well. I was actually surprised how good targeting and swinging was with it.

Detail of how the Tails are Attached to the Handle and the upper „bulge“

Of course, throwing this flogger takes some getting used to. Instead of straightening out a few dozens of tails more or less loosely flying into the same direction, there are only six (resp. 8). So it takes a bit less force and control to direct them towards a target.

After talking about the technical aspects, let’s look at the sensation side of this flogger. The impact sensation of this toy is unlike any sensation I have felt before from a long-range impact toys before. It does its name really justice. The width, weight and rounded tips of the tails only produce a deep, satisfying thud. If you hit the sub lightly, it will be like caressing, if you hit him full power, the sheer force will throw him forward in a shattering way. The level of thud you create is highly disproportional to the weight and mass of the tails. Most testees compared it to a at least 40 tail cow flogger. So even more than usual I highly recommend trying out this flogger with a trusted play partner starting with low intensity and a thorough debriefing.

Detail of the Round-Cut Tail Ends which are Sadly Unevenly Long

If you want to get a bit of sting out of the Massage Flogger you could try hitting with the tails’ sides. But on the one hand, the tails usually orientate themselves towards the wide side, on the other hands the tails being made out of soft leather, after hitting with the side, the surface “falls” on sub’s body adding thud.

Like all thuddy toys, extra care is advised when throwing this flogger. The amount of kinetic energy hitting the bottom’s body can severely damage organs if you hit anywhere except the left and right side of the rip cage (and not the spine!), chest, ass and thighs with much force!

Conclusion: Good value for money flogger with a unique sensation.
Pro Cons Where to get Price
Unique sensation Not all tails have the same length Bare Leatherworks $99.95 – $133.95
Extremely well balanced
Good value for money Simple, industrial design instead of craftful plating

 

Oxballs Watersport Strap-On Gag

The Oxballs Watersport Strap-On Gag

Vendor: Regulation

Over the years Oxballs introduced several gags, plugs and even systems to turn greedy piss pigs into obedient urinals. All of them had their short-comings. But – to get ahead of myself – this one is a massive leap forward!

Construction

The main body of the gag is an US urinal-like shaped body which roughly measures 105x95mm; the bowel to piss in measures 80x72x45mm. Unlike its predecessors the body and the outlet is cast in one piece. The outlet tube sits at the bottom of the bowel, flanked by juts so the last drops gather in front of it. It is 37mm long and has a diameter of 30mm with a bulge at the end so it cannot slip between the teeth. Another important improvement is that the recess for the mouth now sits above the trough’s rim. So it can be filled to the max, the nose is still close enough to smell the piss but the sub can still break (and the top can easily hold his nostrils together without getting his hands wet when he doesn’t swallow quickly enough…).

Detail of the Trough’s Interior

Left and right, on top and bottom of the body are wings with rectangular holes. Through these neoprene straps are threaded. The each strap has four snap fasteners on one side to adjust the length between 230mm and 300mm to fit most heads. On the other side the four straps meet at the back of the head in an O-ring, yet again closed with a snap fastener. My recommendation is to switch the straps around because it is easier to adjust the length of the straps at the back of the sub’s head instead of fiddling around in front of his face. For this new gag Oxballs added another strap with four snap fasteners which runs across the head. It locks the gag firmer into place.

Detail of the Forehead Strap for an Extra Snug & Safe Fit

As already said the entire body is cast in one piece and made out of Oxballs FLEXtpr. It is non-toxic, phthalate free and thus body and drink safe. It cleanes easily and the liquids drip off beautifully, flowing towards the bottom of the trough 😉

Playing with the Watersport Strap-On Gag

The most important aspect of a piss gag are the performance KPIs: The trough and outlet tube have a capacity of 135ml if you fill it to the brim. While this does not sound much, the large internal diameter of the tube allows for a flow rate of roughly 3600ml per minute. It takes a trained piss sub with a good swallowing reflex to keep up with this amount of liquids entering his mouth. Since the gag is cast in one piece, there is now piss flowing out next to the outlet so the top can monitor how much piss is actually swallowed. While the trough is not too large, with a bit maneuvering two (slim) tops can piss into it simultaneously.

Detail of the Trough with the Wings for the Headstraps

The outlet tube has a very good ergonomic design. The diameter is small enough to prevent lockjaw even during longer periods. This partly due to the FLEXtpr being a soft material so the teeth rest comfortably on the tube. Yet it is sturdy enough to take some strong biting down to pinch off the piss flow. Also it is not too long to make subs even with small mouths gag yet long enough for somewhat effective tongue suppression. Of course, a determine sub can still block the liquid from entering his mouth but compared to other models on the market it takes more effort.

Detail of the Moutpiece

The new strap design is also a huge improvement. The wings on the side really hug the head. The two straps despite not using Velcro anymore and thus limiting the adjustability make for a more secure fit. The perpendicular strap improves the secure fit even more. But the more important aspect is the psychological one. The three straps for most of my testees turned a “simple” gag into a head harness, a piece of gear that enveloped their head. Add to the sense of drama and transformation when the straps are adjusted and fastened. This created for most of them a stronger piggy headspace, a feeling of being “turned” into an object to serve.

Conclusion: Effective and transformative piss head gear.
Pro Cons Where to get Price
Design that prevents spoilage and makes blockage hard Trough is a bit small Regulation £89.99
Good flow rate capacity
Secure fit through many straps…
… with added mindfucking effect
Easy to clean

Cockhead Focusing Pods

The P.E.S. Electro Cockhead Focusing Pods with 4mm Banana Jack Adapter

Vendor: P.E.S. Electro

This is the last review of this year’s E-Stim Special and it is readers pick. A couple of weeks ago I stumbled across this electrode in the far back right corner my electrode drawer. Having bought this toy years ago in a Regulation sale, I thought I reviewed it ages ago. But it turns out, I didn’t.

P.E.S. used to be a player in the electrode game. But about 5 years ago they vanished almost entirely from the kink retail scene. So I put it in the hands of my followers on Twitter if they were interested in a “legacy” review and well… you can figure out the outcome yourself.

Detail of the Connection of the Glans Rim Ring and Glans Tube

Design

The Cockhead’s design is fairly simple: The basis is a ring made out of a stiff 5mm conductive silicone. This ring comes in diameter of 25mm, 32mm and 38mm. So it is not really made for the well-endowed members of the kink scene. Perpendicular to this ring runs an 110mm long and 3mm thick conductive silicone tube. On one side, It is connected to the base ring using a plastic pin. On the other side it runs through a hole in the base ring, allowing for adjustment according to the glans length. Between the connector and the hole, three 10mm gold-plated spheres can be moved freely. The end of the glans tube is wrapped in a barrel-shaped piece of plastic with a copper pin at the end. Onto this pin you clip an overall 150mm long lead that ends in a 4mm banana jack.

Detail of the Focusing Pods

Playing with the Cockhead Focusing Pods

The design closely resemblance the one of the (considerably younger) Mystim Plunging Pete. However, the Cockhead Focusing Pods is a very different toy. First of all, it is a monopole so you always need a second electrode connected to the same channel to create a sensation. Due to the physics of e-stim, the stimulation is almost only felt on the focusing pods; you can get a bit of feeling on the glans ring if you apply conductive lube on it. But since the pods have relatively little mass and contact area, in almost all electrode setups, the focusing pods will be the area where the sensation is felt. This enables easy and potentially devious experimentation. Either place all at the frenulum, use the draft of the glans tube to pull it lightly into the piss slit or set the entire glans on electric fire. Especially when you have two little sheets of rubber at your hand to place below the pods to isolate individual ones in different scenarios, the Cockhead Focusing Pods offers a wide variety of play.

Detail of the Lead Connection

The thick tubes are also an advantage compared to the Plunging Pete. If the size fits the bottom, the Cockhead stays in plays even in high intensity scenes with an active bottom. Though I have to put an emphasis on “if the size fits”. While other head stimulators offer adjustability to meet every cock size, the Cockhead electrodes of P.E.S. are hit and miss: Either the dick fits, the electrode falls off easily or pinches uncomfortably. This is a particular problem because being only sold in 0.25’’ diameter steps, there are a lot of dicks and glans which are just in between and do not work with this electrode.

Another disadvantage of the design is that it is hard to clean since there are a lot of entry points for water which can be trapped inside. So my piece of advice is not to wash the electrode in warm soap water like others, even when you have used conductive lube. Instead wipe excess lube off and use spray-on sanitizer to clean lube residue off and sterilize the toy.

Conclusion: Mono-polar cockhead electrode for heavy play – if it fits well on the glans
Pro Cons Where to get Price
Sturdy build … if the dick has the right size since not adjustable P.E.S.  Electro $79.95
Good fit…
Difficult to clean
Monopole