E-Stim Systems Stuffer

Vendor: E-Stim Systems

The E-Stim Systems Stuffer Bipolar Anal Electrode

The E-Stim Systems Premium Bi-Polar Anal Electrodes have been getting rave reviews from me since I started reviewing them. So when they asked if I wanted to take a look at their new surface treatment I was al for it – and discovered another major improvement.

Construction

With the basic from like a butt plug the Stuffer is shaped like any other toy from the E-Stim Systems Torpedo Range. The head has a diameter of 6.25mm and a length of 9cm. It takes 3cm from the tip to reach the maximum diameter so this plug is rather dull. The neck has a diameter of 38mm and is 22mm. Both the head and base which is 40mm long taper towards the neck for a more comfortable fit. For easier grip while playing the base features four grooves. With an overall length of 152mm you get a lot of metal which results into a total weight if 955g.

The material and production quality it top notch! The screw connecting the top and the bottom is stainless steel and the plastic is quite sturdy. The piece de resistance is the aircraft grade aluminum the head and the base is made out of. In March E-Stim Systems introduced a new surface treatment which give their anal electrodes a more even, satin like matt finish which liooks great.

Left: An E-Stim Systems Large Torpedo with the Previous Finish
Right: E-Stim Systems Stuffer with the New Finish

E-Stim Systems so convinced by their build quality that they give a lifelong warranty and having been using these kind of electrodes extensively for almost 5  years I have to agree. Even the plastic hasn’t aged. Yet there is a drop of bitterness with the combination of the aluminum head and the stainless steel screw: Since the screw is harder than the material the thread is cut into, if you tighten the screw too tight too often the thread will get a bit dull. With my old electrodes this made unscrewing both parts a bit difficult. But E-Stim Systems fitted the Stuffer with a hexagon socket at the bottom of the screw so you can now use a hex key for easier unscrewing.

Speaking of screw and thread, for easy cleaning this toy is made out of five individual pieces: Through the base a hole is drilled. Into this hole a plastic insulator is put into which the screw is put. Onto this screw you put another piece of plastic which forms the neck. On top of this you screw the head of the electrode. Into the base and the connecting threat holes for 4mm banana plugs are drilled. The holes are far enough apart for using low profile plugs so you can comfortably sit on this plug.

Another neat thing is that the toy comes in a nifty and stylish black box that can be adjusted length-wise. So if you don’t store your e-stim toys in them but display them proudly you can store other stuff like clamps in there. I use one of the larger boxes for band-aids and the a thinner one for sounds.

Playing with the Stuffer

Since nothing has changed in the way the Premium Bi-Polar Electrode performs this section is a copy and paste from older reviews of this toy.

First a piece of advice on how to read this section: I will only discuss how the physical properties influence the sensation. The sensation itself depends very much on your e-stim box and the program you select.

Detail of the Hexagonal Socket for Easier Disassembly

When choosing the right electrode before play there are three important things to keep in mind:

• The Material: Unlike other soft materials like vinyl or silicone most anal toys are made out off aluminum will not yield! So if you can barely fit a 64mm vinyl plug into your ass taking the Stuffer will at least take some training, especially because the dull top makes it hard for the ass to open up. If you sphincter isn’t exceptionally well trained (I am talking taking a fist without much pre-stretching) I highly recommend pre-stretching with softer toys which have steeper slopes. But you will get rewarded with a REALLY stuffed feeling. Especially when walking around that if you walk around and your hole gets loose there is a chance of almost 1kg of metal hitting the floor which isn’t good news for tiles or hardwood floores…
• The Handling: A lot of people put condoms over their anal toys when switching partners. The condom’s latex layer will at best alter the way the current flows thus might produce unwanted effects, at worst no current will flow at all. But because the metal is easily cleaned and disinfected this isn’t a big issue if you clean your toy thoroughly after using it on one partner. The best way of cleaning this toy is to disassemble it, put it into hot water with a bit of detergent added to it. Scrub with a soft brush, rinse the water off and let the parts dry. Once they are, spray your preferred sanitizer on them and assemble them again once dried.
• The Lubrication: When it comes to lube I would always recommend water-based lube. The glycerin in the lube will help the current flow from the metal to the skin. A thick layer of silicone lube can produced unwanted effects.
• There are specialized electro lubes out there but in my opinion they are overrated. For my sessions I use Swiss Navy water based lube. It keeps it gliding properties for a long period of time and transmits current very well.

The E-Stim Systems Stuffer Disassembled for Easy Cleaning

When it comes to e-stim a good rule of thumb when it comes to the sensation is !the larger the mass and contact area of the electrode the smoother the sensation”. Since this is the heaviest and larges anal bi-pole I own the sensation was as expected silky smooth. But unlike the other electrodes the mass difference between the base and the head is so large that the sensation is nearly only felt at the base. It was a weird, hard to describe feeling putting the stroke program on. Usually this created a fucking sensation. This time… it was not bad just different than expected.

Of cause you can also use the electrode also as a monopole. Just plug one banana plug into the anal electrode and the other one onto another electrode, a pin wheel or a rubber loop for example.