E-Stim System ElectroWhisker

Vendor: E-Stim System

The E-Stim System ElectroWhisker

The E-Stim System ElectroWhisker

Design

The overall design of this toy looks like rutes used for percussion. The handle is a 16.5cm long barrel covered in an isolating material with a jacket for 4mm banana plugs on one end. Out of this handle a fan of thin yet stiff stainless steel wires emerge. The fan is approx. 11cm long and 4cm wide at the end.

Playing with it

As I explained in detail here the feeling of the e-stim sensation is determined by the mass and contact area of the electrode used. Well… the ElectroWhisker has almost no mass so even little output power can create strong sensations. What makes this toy so devilish is how easily you can alter the contact area. Start out with the ElectroWhisker almost parallel to the body making the largest possible contact area and then slowly (!) lift the handle while still applying pressure so part of the fan gets pressed against the body. Just lifting it a bit creates an immense increase in experienced sensation. While this is very fun especially for a true masochist please be careful. Slipping or too abrupt movement s can create really excruciating pain! Also be careful when changing directions: The stiffness and friction of the wires can make single wires stick to the skin and jump abruptly decreasing the contact area which leads to more intense stimulation. To prevent that especially at the end of a scene: Turn of the box before you lift the ElectroWhisker!

Detail of the Tip of the Fan of the E-Stim ElectroWhisker

Detail of the Tip of the Fan of the E-Stim ElectroWhisker

The ElectroWhisker is a monopolar toy so you always need a second pole in order to create a sensation. Since the sensation is always felt at the pole with less mass I recommend using a mass-richer electrode like a metal butt plug; but silicone loops also work. Especially when you press the entire fan against the body blue bands and pad electrodes are sometimes not mass-rich enough. Of cause the alternation of the sensation between these two areas can be interesting but most of my subs found it irritating (Of cause this might what you are going for…). As with any e-stim toy the general rule applies: No stimulation above the waist. But in this case there is “but”: The problem with stimulation that crosses the waist is that current might flow through the heart causing potentially leather effect. If you want to travel over the entire body with the ElectroWhisker, do what I am doing: Take an E-Stim System Classic electrode, put waterbased lube on the head, connect one plug of the leads to the head (that is the 4mm jacket in the middle of the butt plug) and the other one to the ElectroWhisker. Now Place both electrodes close to each other on the body and let them travel parallel close to each other without touching. This takes a bit of practice and coordination and obviously you don’t have a free hand to alter the output level yet it is the only way to safely play on the entire body. Speaking of lube: If you feel that the fan doesn’t travel well enough over the body please use water-based lube in order to ensure conductivity. As the scene progresses the lube dries becoming sticky which can increase the problem so lube up constantly.

Of cause the ElectroWhisker can also be used without e-stim for sensation play. Just letting it lightly travel over the body is an interesting combination of a tickling and scratching sensation. Increase the pressure breaking the bundle into segments for a more scratching feeling. Being made out of stainless steel the wires can be used for temperature play either cooling them down or heating them up. (Caution! This form of fire play is dangerous! Only do it if you have been taught by an experienced player!) When heating them especially if you want to make them glow red take care that you don’t heat them up too for up the handle otherwise the isolation and soldering can be damanged.

Cleaning this toy is easy: Simply spray a sanitizer on the fan and let it dry off. If you used lube wash it with hot water and soap. Please be careful not to get water into the area where the fan emerges. Getting the water out of there is a pain in the ass and drying takes ages!

Conclusion: A delicate and devilish toy that takes some practice to handle well with e-stim.
Pro Cons Where to get Price
Wide range of possible sensations Takes time to really learn to control it well E-Stim System £40
Usable for heat play

E-Stim 2b Pro Pack

Vendor: E-Stim System

_DSC2757

The E-Stim System 2b Pro Pack including the Power Unit and USB Link Cable

One of the most asked question regarding E-Stim is if the 2b is a good power unit. Since for a long time I haven’t had a chance to play with one I am very glad that E-Stim System provided me with a review sample for this year’s E-Stim Special.

Since this review was written, E-Stim Systems renamed the Pro Pack Bonus Pack, but the content stayed the same.

Construction

The 2b Pro Pack comes in a nice sturdy black box which with just a few modifications can also house some basic e-stim toys like sounds or conductive loops. Inside the storage box is the 2b power unit, a power supply unit with adaptors for the most common plug systems, a 9V battery, two 4mm banana plug leads, an audio CD with music for the audio input of the power box, the cable to connect your 2b to your PC, an USB stick with the connection and the remote control software which you need to update the firmware of your box and of cause a detailed printed manual.

The 2b power box itself is a black box which measures 145x80x35mm. On top on the right side there is a blue back light LCD. It shows the selected program, the adjustments done to the program (50:50 is the default value; the first value is for just turning the adjust knob, the second for when pressing the select button and turning the adjust knob), the output level of both channel, the selected output mode (low and high) and the battery status. Below that screen are three knobs and a button. The knobs from the left to the right control the intensity for channel A (under which the input of the internal mono microphone is located), the adjustment knob which manipulates the programs and the control for the intensity of channel B. If you press the button labeled select you enter the menu. By turning the adjustment know you can scroll through the different programs which you select by pressing the “Select” button again. After the different programs you reach the different setting menus where you can adjust the output level, engage the tri-phase mode, adjust the backlight or active the remote control mode. On the far right side of the top there are two LEDs which flesh in time with the stimulation.

The Control Panel of the E-Stim System 2b

The Control Panel of the E-Stim System 2b

On the front side there is a slider to activate the box and the input for the external power supply. On the right side there are three 3.5mm jackets. The left jacket is the output for the second channel, the middle is the input for the audio or the digital connection and the right is the output for the first channel. On the bottom of the box there is the lid under which the battery can be put.

Playing with it

Using the box is similar to other quite easy: Turn the box on using the slider and wait 7 seconds for it to boot while it makes a self check and it is ready for play. Then connect the leads to the electrodes, connect them to the box, select a program (the box boots by default into Pulse) and slowly increase the intensity on the desired channel. The 2b has 17 different programs. The sensation of the programs can be adjusted in two ways with different effects by either turning the adjust know or pressing down the select button while turning the adjust know.

Program Name Sensation Adjustment Knob Manipulation Effect Adjustment Knob + Select Button Manuplation Effect
Pulse Both channel simultaneously fire a sensation impulse Impulse Rate Impulse sensation from soft to stingy
Bounce An alternative sensation impulse on both channel Impulse rate Impulse sensation from soft to stingy
Continuous An impulse with such a high frequency that it is felt continuously Sensation from soft to stingy
A Split An impulse on Channel A is, while Channel  B is pulsed with such a high frequency that it is felt continuously Impulse Rate Impulse sensation from soft to stingy
B Split An impulse on Channel A is, while Channel  B is pulsed with such a high frequency that it is felt continuously Impulse Rate Impulse sensation from soft to stingy
Wave The sensation rises to a point depending on the intensity setting, drops to zero and starts rising again Steepness of the climb Impulse sensation from soft to stingy
Waterfall The sensation rises to a point depending on the intensity setting, gradually decreases and starts rising again Steepness of the climb Impulse sensation from soft to stingy
Squeeze An impulse with increasing speed until it reaches a continuous stimulation and starts over again Time it takes to reach continuous stimulation Impulse sensation from soft to stingy
Milk Similar like Squeeze yet with set-off channels so Channel B starts to fire when Channel A is almost continuous Time it takes to reach continuous stimulation Impulse sensation from soft to stingy
Throb A throbbing sensation Intensity of the throb.
Thrust A thrusting sensation Intensity of the thrust.
Random Random impulses are fired The lower the number the faster new impulses are fired Impulse sensation from soft to stingy
Step A bit like “Wave”: The sensation starts at zero, rises, drops and starts over with the end intensity increasing by 1% each stop to the maximum selected intensity. Pause between steps Impulse sensation from soft to stingy
Training Similar to “Step” but the increase is 1/12 of the selected intensity (or 1% if under 12% selected intensity). Pause between steps Impulse sensation from soft to stingy
Tickle A tickling sensation. The faster you turn the knob, the more intense the tickling become.
Stereo Input Creating sensations out of the input (p.e. music) from the 3.5mm jacket. The sensation from channel A are representations of the left stereo channel, channel B of the right. In order to allow for a varied sensation the input volume mustn’t be too high or too low. Sharpness of the response.
Microphone Creating sensations out of the input of the internal microphone. Since it is mono the sensation on both channel is the same. The microphone picks up blunt sounds (like screams and some level of conversation) but it not really made for delicate input like music. It is ok if you have nothing else at hand but if you want more control I would recommend attaching a microphone to the 3.5mm jacket for better and controlled input. Impulse sensation from soft to stingy
The E-Stim 2b Pro Pack including the Power Supply and USB-Link Cable

The E-Stim 2b Pro Pack including the Power Supply and USB-Link Cable

I have to be honest: My first impression of “Well, I max that box pretty quickly.” Then changed the output level to high, used the external power supply which gives an additional 30% power boost and I quite enjoyed it. Yet in order to really love the box you really need to get to know it (like actually all sophisticated digital e-stim boxes). Once you start experimenting with the different modifications through the adjustment knob and the feel of the sensation with select+adjust a whole new world opens up from soft sensation that slowly bring more and more pleasure until I came up to excruciating pain scenes.  That being said this is not a power unit you buy, take out of the packaging and have all the fun. Of cause the standard settings are good and will get you off well but to truly unleash the potential of this box it takes quite some (very entertaining) time.

Especially when you are starting out with this box, one thing that takes a bit time to get used to are the controls. The resistance of the control knobs is a bit strong so it is hard to turn up the intensity quickly. Also: Once you press the “Select” button the stimulation stops until you select a new one which as a safety precaution starts at 1% intensity which at least for my play style is a bit annoying. But as soon as I got used to it, I adjusted my play style and it didn’t bother me anymore.

The Command Software to Remotely Control your E-Stim 2b

The Command Software to Remotely Control your E-Stim 2b

What sets the 2b apart from other power boxes is the remote control feature. You can connect your box to you computer using the USB-link cable included in the Pro Pack (which can be purchase separately for £89) and than either control is via your computer or let someone else control it over the internet. E-Stim System says this feature is still in beta status so be prepared for problem. During my test I didn’t experience any but this might not be the rule.

UPDATE OCT 2018

During Erofame this year, E-Stim Systems introduced a new remote control service called „Connect“ which is more realiable and easier to control than the old Commander. You can read everything out it here.

The box comes with a lifetime warranty and after a bit chaotic group scene I can assure you that it is sturdy build enough for limited impact (though try not to be like me a knock it down a table thrice one evening!).

Conclusion: Powerful, flexible yet a bit hard to control e-stim power box.
Pro Cons Where to get Price
Wide variety of sensations possible Takes long time to master E-Stim System

Mr S Leather 2b Power Pack

Mr S Leather Accessory Pack

£379

$399.95

$119.95

Powerful if used correctly Controls are a bit firm
dual audio input

Oxballs Jolt & Volt

Vendor: Oxballs

The Oxballs Jolt

The Oxballs Jolt

In last year’s e-stim special I already reviewed the Oxballs Zap and loved it a lot despite it being a bit small in some situations. So I am glad to start out this year’s e-stim special with two toys Oxballs sent me that fit most people with larger junks.

Construction

The construction of the Jolt is very much alike the Zap. The basis is a 12mm thick and between 20m and 24mm high on one side tapered ring out of platinum silicone which has a diameter of 45mm. On each high side there is hole through which the aluminum electrode is put. The contact area of the electrode has a diameter of 19mm. On the other side of the electrode there is a 4mm hole drilled in with there is sheath with a 2mm hole if you order the version for 2mm pin connector. The electrodes can be easily taken out for cleaning or using on other Oxballs e-stim toys.

Detail of the Electrode of the Oxballs Jolt

Detail of the Electrode of the Oxballs Jolt

The Volt is actually just an electrode. The profile of it looks like a C with a tapering base on one side. Inside the base there is the 4mm hole resp. 2mm sheath to connect the electrode with your power box. The space inside the C measures 16mm by 18mm. The entire electrode is 15mm wide and has an overall length of 39mm. It comes with a Sprocket cockring which is made out of Soflex TPR so it is super stretchy. It has a width of 10mm and a height of 12mm with a 25mm diameter opening in the middle.

The Oxballs Volt

The Oxballs Volt

Playing with it

The problem with the Zap designed as a ball stretcher was that through the rigidness of the platinum silicone it was hard to get over the balls. With the larger internal diameter of the Jolt this is no problem anymore – as long as you have a meat ball sack as I do. I have had people in my test pale whos balls were too big for the Zap yet too skinny for the Jolt. In this case the Volt comes into place: Through the C-shape part it can be attached to nearly any Oxballs toy or cockring. I have tried it with the Nuttsling, Splitsling, Powerballs, Trough and Unit X Stretch and it worked perfectly. So pick up two Volts, take your favorite Oxballs cockring (most ball stretchers from them are too high to work so if you want a stretch I recommend attaching the Volt to one and stack multiple stretcher) and put it around your balls. The ability to attach Volt to various ball toys makes it a nifty toy for all kinds of e-stim scenes. I used one at the top of a Nuttsling as the counter pole when using an e-stim sound. Another very useful scenario is putting a cockring around your wrist, attach the Volt and let the hand travel over the sub’s body holding a monopolar electrode like a pin wheel in your other hand. For this scenario I recommend using ample water-based lube.

Detail of the Oxballs Volt Electrode

Detail of the Oxballs Volt Electrode

But also the Jolt shines in the playroom. The tapered form allows for an even snuggier fit. It is also finally large enough to be put around pumped up dicks or (saline)-inflated balls or be worn as a cockring. Depending on if the opposite poles are left and right of the shaft or pressing against the root of the penis and the taint close to the prostate the effects can be… interesting. The most interesting scenario I used it for was in combination with an stainless steel ball stretcher. I put it around the already compressed balls. Through the ridgedness of the toy there was additionally lateral pressure applied to the balls. And then the e-stim was added…

The Oxballs Volt put onto Various Oxballs Toys

The Oxballs Volt put onto Various Oxballs Toys

Maintaining both toys is easy: They are safe to be used with the most common forms of lube like water- and oil-based, hybrid and silicone lubes. Though for the conductivity I strongly recommend only using both toys with water-based lube. When you have played with them simply wash them with warm water and detergent, rinse them and let them dry. After that to be extra safe I spray them with a sanitizer.

Conclusion: Very versatile bi-polar e-stim toy for larger (Jolt) and all sizes (Volt) junks.
Pro Cons Where to get Price
Flexible with many usage scenarios Oxballs Jolt (bi-polar version)  $59
Easy to use
Resistant to most lubes Oxballs Volt (mono-polar version) $30
Easy to clean

McHurt Slave Driver

Vendor: McHurt

Construction

Both Versions of the Short McHurt Slave Driver

Both Versions of the Short McHurt Slave Driver

These toys are basically build like traditional all leather riding whips were made before the shafts were made out of polymers. The handle is made out of four layers of English bridle leather which is sowed and glued together. Out of this handle the slapper develops. Depending on the version it is either a 25cm long and 1.5cm wide strap of bridle leather or four 27.5cm long 7mm wide square cut bridle leather straps. At the back end there is a woven knot and a leather loop. Both versions have a total length of 55cm without the loop.

Detail of the Knot and Loop at the End

Detail of the Knot and Loop at the End

The come in different color versions yet for some weird reason not in all black. I chose black with red accents which I guess will still fit most play rooms.

Playing with it

When I first showed these toys to a friend he said “Well, they kind of look like the child of a single tail and a riding whip” and that puts it really well. Both whips are vicious! Even a light tapping already produces some level of sting that with just a little bit more force becomes intense. Though the single slapper is a little bit less intense than the other one.

Detail of the Handle Turning into the Slapper

Detail of the Handle Turning into the Slapper

I like these toys for their handling. While in single tail terms the single strap one resembles a legree resp. dragon’s toung and the four square cut model is like a whistler, the handle of both toys are stiffer making them easier to control than a single tail. They are also just short enough to be used on a sub bound to a spanking bench yet just long enough to throw at the back of a sub bound to a St. Andrews Cross. Yet in this case most likely the tips only hit the back causing VERY intense pain. If you are more interested in the latter usage scenario there are longer versions of both toys available. Since McHurt doesn’t sell these toys online I sadly can’t tell you the exact length. If you are interested in them, just shoot them a mail.

Detail of the Two Different Slapper Versions

Detail of the Two Different Slapper Versions

Both toys mark fairly well and quickly. While the legree like produced more bruises, the whistler like whip can leave welts. A top of my test panel managed to break the skin with the whistler in a long scene. I could not recreate that yet it is something to be aware off. Especially since the leather has not surface treatment and thus is difficult to disinfect.

Conclusion: Vicious and easy to use stingy impact toys.
Pro Cons Where to get Price
Intense sensation with minimal force Hard to clean McHurt Around 32€
Easy to Use
Well Made only out of Leather

 

Fort Troff Aluminum Frat Paddle

The Fort Troff Aluminum Frat Paddle

The Fort Troff Aluminum Frat Paddle

Vendor: Ballistic Metal

Sometimes I wait so long to write a review that the shop where I have gotten the toy stopped selling it. Luckily in this case I found their original supplier which now makes the paddle a bit different. So please read this review careful where I point out the difference and check the pictures of the new store link if that is really the paddle you want to buy.

Construction

This paddle is shaped in the traditional fraternity paddle shape. It is made out of 0.7mm thick aircraft grade aluminum and weights 500g. The head is roughly 30cm by 8.5cm and features three rows of four respective five holes. The handle is 14.5cm by 3.5cm which at my Fort Troff paddle is covered with a rubber sheath for better grip but sadly lacks a hole for a loop. The Ballistic Metal version has three furrows engraved and a t-shape end for better grip. It also has a hole for a loop.

Detail of the Holes to Reduce Air Drag

Detail of the Holes to Reduce Air Drag

Playing with it

This is a nasty and delicate spanking implement! The holes drilled through the head reduce the air drag significantly so there is nothing to lessen the blow. Also, the material has no give so the entire kinetic force hits the sub’s body. So you quickly cross the threshold from stimulating tapping to rather stingy pain which can become excruciating with a lot of force. If you enter this area of pain please be careful. Being made out of metal it can break bones! So I recommend only use the most extreme force on well padded body like the thighs or the ass. And even there please be considerate.

Naturally with such a small handle the paddle is not very well balanced so be cautious when using this paddle not to tire out your wrist.

A nice material property of aluminum is the fact that is quickly takes on temperature. So when the area is nicely spanked red and warm dip the paddle into a bucket of ice water for a minute to let it cool down. The sensation of a cold paddle hitting a warm body area is quite unique.

Conclusion: Sever and indestructible spanking paddle.
Pro Cons Where to get Price
Indestructible Unbalanced Ballistic Metal $79.90
Handy

 

Oxballs Ball Busting Paddles

Vendor: Oxballs/ Ballistic Metal/ The Kinksters

The Oxballs Spyro Ball Busting Paddle

The Oxballs Spyro Ball Busting Paddle

Design

The shape of this toy is the one of a traditional ball buster. First there is the handle which is made out of aircraft grade aluminum. It is 28.5cm long and 3.3cm wide. The lover 2/5 of the handle are covered with a rubber sheath for better grip. If you want to feel the aluminum in your hand you can take the rubber off. On the other end a 3.5cm thick silicone pad is attached. It is round with a diameter of 9cm. While one side is plain the other side has some texture on it. The Spyro features a vortex while the Stay has a puppy paw and the Basher a number of spikes.

The entire Spyro ball buster weights 500g.

Playing with it

What first struck me when picking up this toy for the first time was the balance. You can use it without tiring out your wrist for extended periods of time. This balance is good because this paddle offers a wide range of different pain sensations making it ideal for long elaborated scenes. The plain side is somewhat stingy despite the soft material and relatively high weight of the toy. The small diameter delivers the pain in a concentrated area. Because of that as the name says this toy is ideal for ball busting. Simply tie the balls down (best use on of Oxballs many stretchers and rings or for an even more intense sensation a metal ball stretcher) and start gently tapping against the balls with increasing intensity.

Detail of the Plain Backside of the Oxballs Spyro

Detail of the Plain Backside of the Oxballs Spyro

The sensation of the other side greatly depends which of the three different versions you own. The vortex of the Spyro traps air thus creating a cushion which makes the impact sensation a bit softer. With the Stay the initial impact area is smaller so the sting is a bit more intense. Also, it you are good at targeting and your sub is well restrained in place after only a few smacks you start leaving a paw shaped mark that depending on the intensity and duration of the scene will stay for a while. The Basher in my opinion is not really made for impact play. The spikes trap air, they bend and it is difficult to hit precisely with hit because you can slip during the impact. The spikes are more made for sensation play. Let the head travel over the sub’s body to tickle him or give him goose bumps. The sensation can be altered when using lube. Without the silicone is a bit sticky causing a rougher, choppy ride over the body, when using water-based lube is a smooth journey. Please only use water-based lube since silicone lube will disintegrate the toy!

If you have the Spyro or Stay you can grab the top using it as a round handle (due the spikes of the Basher I it hard to grab) to use the aluminum handle as a paddle. Of cause the ergonomics of this toy weren’t really layed out for this usage so your wrist will tire out quickly. Yet the sting of this lightweight, small paddle is intense!

Detail of the Vortex of the Oxballs Spyro

Detail of the Vortex of the Oxballs Spyro

Additionally to the wide range of possible sensation the material makes this toy ideal for play parties. It is somewhat small, not too heavy and can be disinfected easily so you can use it on multiple play partners with just short cleaning breaks without having to worry about transmitting any bacteria.

A disadvantage that really annoyed me was the lack of a hole for a loop. I prefer to have a loop to secure the toy on my wrist so I don’t have to put it down when I check in on a sub which sadly it not possible with this toy. Same problem with storing it: While my other impact toys are hanging ready to grab in a scene I need to open a drawer to get this one. I know, this is a minor thing that doesn’t impact the toy’s performance yet it really annoys me.

Finally a word on availability: Sadly these great toys are a bit hard to come by especially in Europe. So if you are looking for another variety but the Basher you have to order it from the USA.

Conclusion: Very versatile ball busting toy with true spanking potential
Pro Cons Where to get Price
Wide range of sensations No loop for holding it/ storage Spyro Ballistic Metal/ Oxballs $84.95/$79
Versatile Stay Ballistic Metal/ Oxballs $84.95/$79
Basher Ballistic Metal/ Oxballs/ The Kinksters $84.95/$84/£43.99
Well build
Easy to clean

Mr S Nasty Rubber Stick & Nasty Lil’ Rubber Paddle

Vendor: Mr S

Mr S Nasty Rubber Stick & Nasty Lil' Rubber Paddle

Mr S Nasty Rubber Stick & Nasty Lil‘ Rubber Paddle

Construction

As the name of these toys already states they are made out of rubber. While the scent is not as intense as on a piece of rubber clothing they have a faint, for most rubber fetishists stimulating tire scent. The stick is 46cm long, has a diameter of 1.9cm and weights approx. 150g. The main body of the paddle measures 18x8cm and has a 12×3.5cm long grip. The paddle is 1.2cm thick and weights 250g.

Both toys have a hole drilled through their rear end through which with leather string forms a strap.

Playing with it

A friend of mine from Chicago calls the Nasty Rubber Stick his “ouch stick” and right he is. Despite the considerably high weight for an impact toy, the little give in the material makes them stingy as hell! I recommend approaching the max. impact power very slowely cause the blast they deliver is intense and even a mild to medium continuous tapping can be agonizing. Naturally both toys color a sub very quickly. Even a medium blow will leave a red mark on the skin that will stay for some time. When you put real force into the single hits and concentrate on one area bruises will inevitably occur!

Detail of the Leather Strap

Detail of the Leather Strap

If you want to get a somewhat mild impact sensation out of these toys I recommend snapping them. Being very flexible the snap back not fast and thus the sensation is a mild thuddish sting.

Rubber conducts temperature very well. So as the cheeks of the sub begin to turn red and warm the paddle will get warmer. Of cause this also works in the other direction. For an interesting twist stick the paddle in a bucket of ice water. This effect isn’t as strong as with metals and due to begin frail when frozen don’t put the rubber toys into the freezer before a scene. For that I would recommend aluminum impact toys.

A big advantage of these toys is the material: When you play with different partners at a play party simple spray disinfection spray on the toys and rub it off. The rubber will take no damage from it. While you can use silicone oil or lube to make these toys shiny like rubber gear I would not recommend it. The silicone will make the toy slippy then hitting the sub and create a film on the impact area. So if you switch to another toy it will pick up the silicone lube.

Conslusion: Sever and low maintenance impact toy.
Pro Cons Where to get Price
Creates intense sensation without much effort Hard to dose sensation Mr S’ Nasty Rubber Stick $28.95
Easy to clean Mr S’ Nasty Lil’ Rubber Paddle $28.95
Inexpensive

 

Fetters Handlock

Vendor: Regulation

Always on the lookout for toys you can’t find everywhere I was very glad that Fetters send me this toy as a review sample to end the heavy bondage special.

Front of the Fetters Handlock

Front of the Fetters Handlock

Construction

The basis of this toy is an approx. 8cm wide and 40cm long sector shaped piece of latigo leather. At both ends of this piece a long latigo leather belt strap is riveted that runs along the back side and reenters the front side through two holes rectangular holes. Between these holes on the top, bottom and onto the middle of the front a d-ring is riveted. The two straps are secured through a pair of roller buckles with locking posts behind them. Between the buckles and the locking posts there is an additional d-ring. The back of the this restraint is lined with soft and thick leather padding that is way longer than the latigo body. So when the joints are fettered using the straps they are surrounded by padding.

Left Smallest and Right Largest possible Cuff Size of the Fetters Hand Lock

Left Smallest and Right Largest possible Cuff Size of the Fetters Hand Lock

Finally a word on the build quality: Like all Fetters toys I have had the honor of playing with so far the manufacturing of this toy is flawless. The stitching is meticulous, the rivets are perfectly in place, the d-rings and straps feel solid and the toy has an overall feeling of high quality to it –if it wasn’t for the holes for the strap. When I first got this toy I was surprised that there you could see foam at the backside along the edges of the holes. Of cause the holes are surrounded by a seam so there is no chance that they padding of leather will fray or tear. Yet such a minor imperfection I usually would not make a deal out of stands out of such perfection. So I got in touch with the guys and Fetters and asked for the reason. It turns out to get the holes in just the right angle and position they are punched through once the padding is added to the body. There is no other way to do it but through my input they are looking at ways to make the holes maybe look a bit nicer. Since they gave good reason why the toy is the way it is I won’t hold the design against them. Just don’t be surprised if you see some padding foam. Everything is perfectly ok.

Playing with it

As the name of this toy says it is made to lock both hands together. It basically works like a wide, comfortable handcuff. In order to really keep the sub from freeing himself you have to lock the straps in place. For this the max hole in the belt you can use it the 7th. While this might sound quite a lot of length you are losing I have yet to find a wrist that would not fit in this setting.

Detail of the Locking Post and the D-Ring next to the Roller Buckles

Detail of the Locking Post and the D-Ring next to the Roller Buckles

Once attached to the sub the bondage possibilities are nearly endless. With a total of five d-rings you can spin elaborate webs in a bondage frame. Through the padding this restraint is very comfortable to be worn over extended periods of time, even in rather uncomfortable positions. I have used this restraint to tie the hands behind the back or above the head while playing with wax, e-stim and on the nipples of the sub. This created quite the reacting but despite moving heavily and pulling on the restraint he didn’t slip out of it or felt uncomfortable. Of cause, this design is not made for suspending the entire body weight from them! This comfort can also be used to recreate one of the most iconic bondage positions: The hogtie. Simply connect the handlock to a pair of ankle restraints and let the sub slowly get uncomfortable. I would recommend using the top d-ring for that because than the force pulls in direction of the hands which is more comfortable than a perpendicular force. You might have seen my pictures of the impro straitjacket restraint setup I posted on Tumblr. This handlock can replace the feet restrain which keeps the arm together in front of the belly.

When a sub is bound using these restraints I would recommend him to fold the hands. It makes the restraints more secure and more comfortable. And is a hot look! Attach the restraints to a collar using a padlock so he can’t free himself and he at least looks that he is worshipping you.

Despite the name of this toy you can also use it as an ankle restraint – if the ankles aren’t too big. There is some foot movement possible through turning the leg inside the lock. Yet a fettered sub won’t go anywhere too soon. Naturally you are using the far end of the strap for that so you won’t be able to use the locking post. But this should not stop you to incorporate this toy in a bondage setup, p.e. as a foot restraint for a hogtie or when tying the sub in a latin cross position keeping his feet neatly together.

Conslusion: Unique and well made piece of bondage gear.
Pro Cons Where to get Price
Comfortable over extended periods of time Locking posts could be closer to the buckle Regulation £109.95
Many different bondage possibilities
Very well made
5 D-rings

HML Fetish Isolation Hood

The HML Fetish Leather Isolation Hood

The HML Fetish Leather Isolation Hood

Vendor: HML Fetish

This hood is another toy I discovered when visiting HML Fetish last December. I already had the Heavy Bondage Special in mind back than so the guys sent me this hood as a review sample earlier this year. Since making pictures of a hood without person to wear it, all pics in this article were made while I tried out the hood for the first time.

Construction

This HML Fetish Isolation Hood is made out of soft black high quality leather. Every part of the hood is lined with leather so it has quite some weight and smells intoxicatingly good off leather. The hood’s basic design is a double face hood. There are zippers in the front and in the back. The back zipper covers a lacing possibility with a leather strap which is used to bound the sub tightly into the hood. Behind the front zipper lies the face hood which has a cut out for the mouth and a piece of leather that covers the nasal wings. The eyes are closed on this hood. What sets this hood apart from other double face hoods are the thick pieces of padding over the ears.

Detail of the Double Face behind the Front Zipper

Detail of the Double Face behind the Front Zipper

I have gotten the size M which measures roughly 34cm by 32cm. Depending on your forehead circumference and the amount of hair that has to fit under the hood HML offers sizes from S to XL.

Playing with it

This hood is a true isolation hood. The padding with its pressing sensation against the head creates an intense bondage sensation. It muffles all sounds. If you add ear plugs or headphones with white noise the sub looses it hearing all along. Since there are no cut outs for the eyes most subs remains blind when the front zipper is opened. However, depending on the nose shape and size light and glimpses of the scene can get past the nose. I am already discussing with HML how to address this issue. Because if the sub can’t see anything this hood is great for humiliation play. Leave him stored as a leather gimp and only open the hood to use his mouth for licking, sucking or pissing into him. Of cause while stored he will inhale the intense scent of high quality leather.

Detail of the Lacing Behind the Rear Zipper

Detail of the Lacing Behind the Rear Zipper

One of the most interesting scenes I had with this hood was stripping the sub naked and just putting this hood on. If you take away the sight and hearing of a sub he will probably get more and more disorientate over time. I would not recommend letting the sub stand unguarded for an extended period of time wearing this hood. If the area the sub is standing is obstacle free you can of cause turn this intensifying feeling into a game: Walk around him, tell him to walk towards you, smacking him with a riding crop from various positions and see him struggle.

Finally a word on the material: Last week I talked about a neoprene hood and said that you can put a cotton pad with poppers under the front zipper. With this leather hood, I would not recommend it! Poppers is a rather aggressive substance and it will damage the leather. If you want to get your sub high on this substance stick a gas mask hose between the two front zipper’s runners.

Conslusion: Very well made intense isolation hood with double face feature
Pro Cons Where to get Price
Heavy hood creating an intense bondage and isolation experience… … if the nose isn’t too small HML Fetish 495€
Very well made out of high quality leather
All over lined with leather.
Thightness can be varied through the lacing

665 Leather Neoprene Confinement Hood

Vendor: 665 Leather

The 665 Leather Neoprene Confinement Hood

The 665 Leather Neoprene Confinement Hood

Construction

Today’s toy of the Heavy Bondage Special is made out of soft neoprene. The soft side of the neoprene is always on the outside on this toy. I am reviewing the L/XL version that measures approx. 31cm by 29cm. While this may sound large please be advised that I have a somewhat average head size and this mask sits quite tightly and is a bit difficult to put on. While neoprene stretches and thus creates a great confinement sensation (see: next section) this hood is definitely not for quickly throw on, especially if the sub has much hair.

Over the entire front of the hood runs a zipper behind which a roughly anatomic mask with cut out for the eyes and mouth is sowed. On the back there runs a zipper up the half to make putting on the mask easier. In order to keep from hair getting caught in the zipper a piece of neoprene covers the zipper from the inside.

Detail of the Back Zipper for Easier Access

Detail of the Back Zipper for Easier Access

I am a bit indecisive what to say about the build quality. The seams of this toy are flawless. Again, they are not welded yet for a hood I don’t consider that important. Sadly the cutout of the double mask is not as precise as I would have hoped for. Luckily neoprene can quite easily be cut with a good pair of kitchen scissors yet this gets a deduction in the B-note. But what you should keep in mind: $50 for a double face hood is a bargain!

Detail of the Inside Mask behind the Front Zipper

Detail of the Inside Mask behind the Front Zipper

Playing with it

While last week’s reviewed toy was all about fitting loose this mask is the complete opposite. The neoprene fits tightly around the head, creating an intense feeling of bondage. If you add ear plugs they get firmly pushed into the sub’s ears canceling out noises very well and adding to the feeling of isolation. Once the front zipper is closed the sub is caught in darkness, inhaling the neoprene scent. This property makes this mask the ideal companion for the Neoprene sleepsack I reviewed some time ago because it creates total neoprene immersion/ gimpness. Another nice feature of neoprene is its waterproofness. This mask once served as a “storage tool” for a piss sub on a party: open the zipper if needed, close it once done. Since neoprene pulls together you get a bit of a cocksucker hood effect if you don’t open the zipper too much. So you can face fuck the sub while remaining anonymous. Of cause, it takes a bit of practice to find the sweet spot that the tension doesn’t open the zipper completely.

The amount of air that is let through the zipper is enough to allow for a good oxygen supply. Yet if you are into it, put a poppers drenched cotton ball behind the closed zipper and the intoxication is quite intense.

Conslusion: Inexpensive, well confining double face hood
Pro Cons Where to get Price
Great sensation of bondage and isolation Not as precisely cut as I would have wished for 665 Leather $50
A bit tricky to put on
Very inexpensive for a double face hood Sizing on the smaller end