McHurt Light Suspension Bar

Vendor: McHurt

First Impression and construction

The 80cm and 100cm bars

When I first picked up this suspension bar, I was surprised that how light it is. Otherwise there is not much to write about it: It is a metal tube (probably chromes steel) which comes in length of 60cm, 80cm or 100cm with shackles on the ends. They are attached to the tube with rather short butterfly nut like screws. Sadly the ankles of the ears are quite thin and thus the screw thread is very short.

These restraints have a minimum diameter of ca. 10,5cm and a maximum of about 16cm.

Playing with it

Despite being light, I haven’t had any problems concerning stability. What’s more of a problem are the screws and the short screw threats. Just through movement of the sub the screws got loose. At best the entire shackle gets off. But I have times when it was half off. I haven’t tried it out but the metal seems not to be strong enough to withstand large force when being hold on a small area thus leading to bending and trashing of the bar. Also the shackles could be a bit larger. Especially when you work with professional carabiners it can get a bit fiddly getting them through the loop.

Using the spread bar with McHurt restraints

Furthermore, keep in mind that these are light bars and week shackles. So when it comes to hanging people using the bar or really heavy action I would not rely on them. In the end it comes down to the simple question: Do you want something light and cheap (maybe for travelling or just getting to know the kink) or something really professional.