Wrist to Ball Restraint

The Mr S Wrist to Ball Restraint

Vendor: Mr S

Construction

Five individual pieces form this restraint setup. Literally the central element is 31mm wide piece of the typical Mr S soft yet sturdy bridle leather which is burnished and deburred. It is folded several times and riveted to house stainless steel D-rings on both ends. They are 38mm wide and 27mm high and have a wire strength of 6mm so they are really heavy duty! In the middle sits a locking pin.

By threading  the belt through the D-rings, this leather bars connects two cuff style wrist restraints. They are not padded but lined with soft garment leather for a bit more restrictive feeling. The belt is closed with roller buckles and houses a D-ring between two rivets. The restraints are functional and effective, covering a range of wrist circumference form 11cm to 22cm. Depending on how big the sub’s wrist are, you might be able to push the ends of the cuff closing belt over the locking pin to lock the restraints. The roller buckles are wider than the width of the D-ring. This means they “firmly” connected to the connector and cannot be exchange for different, for example padded ones or bondage mitts.

The Scrotum Strap

The locking pin in the middle of the connection bar is the anchor point for a 24cm long and 1.9cm wide strap of bridle leather. It’s bottom is lined with garment leather for a total width of 2.5cm. At the top eight holes for attaching the strap to the locking pin are punched. At the bottom another locking pin is riveted to the strap. It is the anchor point for 35.5cm long and 1.9cm wide piece of extra soft, unlined bridle leather. There is one hole punched at one end and nine at the other. This strap is for attaching the restraint setup to the scrotum and covers a ball neck circumference from a already surprisingly large 15cm to massive, (saline-)pumped 30cm.

The Roller Buckle

To connect all straps, the Wrist to Ball Restaint comes with two small keyed alike Master padlocks. If you already have a keyed alike padlock system for your play space, you can use your pad lock with up to 3.5mm shale wire strength.

Playing with the Wrist to Ball Restaint

The primary purpose of this toy is to create a physical feedback loop between the hands and the balls. The human body usually try to “work out” pain sensation through muscle movement. So regardless of what you are doing to the sub as soon as he tries to move his arms to help processing the sensation his balls will move. The shorter the connection strap, the stronger to force transmition. This is especially devious if the balls are pre-bruised so hurt from movement of when you line the scrotum strap with a (dull) pin strap). I found that particularly fun in combination with CBT or e-stim around the balls. Even more so when you hang a movement sensitive e-stim device from the padlock on the scrotum strap.

The Connector

Of course, this toy also works as a piece of bondage gear without additionally induced sensations. The most basic use is to use it as simple handcuffs without the scrotum part. The connector is not as rigid as a metal on like on Hiatts 840 handcuffs but has less slack and torsional stiffness than carabiners or rope. The connector allows the cuffs to be grabbed easily and forcefully (just make sure the locking pin is between your fingers) so you can handle and direct the sub.

When you include the scrotum setup, the simplest bondage layout is to keep the sub’s arms down. Handily the restraint can be worn below cloths. More demanding is incorporating it into any stress bondage position and watch him try to get into himself into a somewhat comfortable position while he is tugging on his balls. Once the sub has found a somewhat comfortable position, smack his balls to encourage some movement.

The Cuffs in the Smallest and LargestSetting

Putting the restraints on is easy: First put the wrists of the sub either in front or behind his body and fetter them either with the connector’s locking pin either facing towards or away from the body (yes, each of the four combinations has a different effect). Then Tie the scrotum strap around the balls neck, push the single hole of the connection strap over it and close using a padlock. Finally, adjust the tightness of the tug with the length of the connection strap and push the corresponding hole over the connector’s locking pin. Having put the process into words makes it sound more complicated than it actually is. Since I figured out how to use the individual elements, it takes me less than a minute to fetter a sub completely.

The Riveted D-Rings on the Cuff and Connector

When the locking pin is facing the body, there is a little bit more slack in the connection strap so less force is transmitted. For more intense play, let the locking pin face away from the sub’s body. The restraint position has a bit stronger effect. Behind the body is the more traditional position. Due to the elbows being a bit twisted and stretched, there is less way for them to act out things so again it is more intense. Also, the balls are prominently tugged back for easier targeting. However, this way the connection strap covers the anus. If you want to fuck your bottom hard, put the restraint in front of the body. Depending on the sub’s physiology, this even works in doggystyle. For ball torture this position works only limited because the dick is in the way. But if you make a bit of stress bondage out of it by pulling the arms up using the D-rings on the cuffs, you get a nice, strong balls tugging again. Just be careful not to overdo it because the wrist cuffs are not made for suspension bondage!