Fetters Tight Leather Hood

The Fetters Tight Leather Hood

Vendor: Regulation

Making a good hood is an art not mastered by many! This is my first piece of headgear from Fetters. So I was curious if it could live up to the same level of quality I know from their other leather gear.

Construction

The Tight Leather Hood is a four panel hood made out of thick garment leather. The leather is soft and smells rich and delicious just like high quality leather gear should be. Through seams and molding the hood follows the shape of the human head. Below the nose are two small grommets which are large enough for easy breathing even in heavy scenes. The mouth part is reinforced with another piece of leather so it stays in shape over time.

The Nose Grommets and Pin-Hole Eyes

On the back from the neck to almost all the way up to the crown runs a piece of thin nylon rope through cinch rings. They are high quality and sturdy so they can withstand a lot of force when lacing the head tightly and/ or forcefully. A leather wedge below the lacing keeps the hair from getting caught in the lacing. Regardless if you choose the hood to be lined with leather or not, the wedge will always be an unlined, single layer piece of leather.

Besides the leather lining there are several customizing options how the eyes and nose opening are designed. The hood can be outfitted with a snap-on blindfold, a mouth cover (optionally with a pecker gag) and a locking collar. The range of sizes is quite large in theory, ranging up to a collar size of 20’’. But the lower end is at 14’’ circumference which especially for petit subs and ladies might still be too wide.

The Lacing on the Back for a Snug Fit

Playing with the Tight Leather Hood

As the name suggests, this hood tightly wraps around the head and follows the contours of the face without being uncomfortable.  Since the lacing goes up all the way to almost the crown, its tightness can be locally adjusted so the hood can accommodate different head shapes and sizes. Being made out of soft yet thick garment leather you really get the feeling of being encapsulated in it. For an even stronger leather feeling I highly recommend the leather lining. It is hard to put the difference into words but the feeling of the lined hood tightening around the head is more compact, more intense. While the double layer of leather shields the bottom a bit from the surroundings a medium-light touch is still felt.

To my astonishment the fit of this hood is very good despite being only made out of basically four panels! Even the nose section which is often a problem fit most testees well, regardless of the nose was large, wide or pointy. As with every piece of leather gear, it will adapt to the wearer over time so if the nose does not fit perfectly right away, wear the hood over extended periods of time and sweat and warmth would mold this section into shape.

Detail of the Four-Panel Construction

The level of gimpdom is determined by the features chosen. There is not really much to say about the open and no eyes options. The pin-holes of this eye option are 8mm apart. This is just enough for most people to still see almost unobscured. You can add a blindfold which is attached using snap buttons. This of course distracts a bit the clean, smooth gimp look of the hood. Despite being made out of soft leather there is a small gap between the blindfold and the mask itself. This gap is not wide enough for the bottom to see anything but some stray light reaches the eye. For a 100% block-out, I recommend a dedicated blindfold.

The open mouth can also be covered either by just but a patch of leather of a pecker gag. The snap buttons are strong enough to keep the gag locked inside the sub’s mouth even when he tried to push it out with force. The gag option is only available for the round mouth.

The round mouth has a diameter of 45mm. This is large enough to place even a large gag inside. But if you are well endowed it will probably be too small for your dick. Even when your dick is smaller, this hood is not really made for vigorous face fucking. The cutout is just the bare leather edge and not finished with piping. Due to the reinforcement of the mouth part, the edge is stiff. Over time it will get softer but especially in the beginning you can get a bit of leather burn if you fuck too quickly.

The Unfinished Mouth Opening

For the slot mouth I have gotten only second hand opinions. According to a sub from the UK, once the hood is broken in well, you can push a gag through it. But for a dick it is to narrow and uncomfortable.

The final option is the lockable collar. This only makes sense when you want a cleanish look (as clean as it gets with an attached lockable collar). Neither any of the friends who own this hood nor me did choose it because it limits what you can do with the hood. If your sub or you are collared, you probably already have a collar you want to wear with this hood. A looser chain collar might work, but leather collars are too bulky. Since the leather is so soft, this hood even works with a posture or a choking collar. So my advice is not to add the collar just to stay flexible of what you can do with this hood.