McHurt Ihsan Hand and Ankle Restraints

Vendor: McHurt

First Impression and construction

Ankle and wrist restraints next to each other

When picking up one pair of the restraints you instantly get a good feeling: The swine leather is soft, the padding has generous 12mm thickess, the leather strap 3,5 mm thick and even though the used metal doesn’t appear to be stainless steel (I think it is chromed steel)  it seems to be up to the task. On the outside is a little McHurt flag and at the inside one which indicates the size which both can be cut off easily without damaging the restraints.

The size M restraint has a minimum diameter of ca. 4cm and a maximum of about 8cm. The size L restraint has a minimum diameter of ca. 5,5cm and a maximum of about 10cm.

Details of how the d-rings are hold in place

Playing with it

Due to the thick padding and leather, the restraints don’t bend as easily as other ones I had in my hand. The same effect comes into play when you want to tighten the restraints. You will need a bit of force and a hand to squeeze both ends together in order to get the buckle in a tight position. So fettering a sub who struggles is not easy. Also, this “inflexibility” can cause problems when you need to get a sub free quickly. You might want to rely on panic carabiner instead of loosening the restraints. If you are a fan of really tight bondage, this might not be the right pair of restraints for you. The whole distance on the belt is 1,5cm which is standard. I have seen belts with 1,2cm or even only 1cm but it is always a compromise between sturdiness and tightness.

Detail of the roller buckle

But once fitted, the restraints are performing very well. The buckle and the one D-ring sit safely between two riveting under the strap. After a few sessions the leather will get a bit loose due to being a natural material which expands. But I have tried the restraints with beefy ex-soldiers under heavy torture and the restrains never let me down so they will not fail you if cared for properly.

Padding and piping of the restaints

Because the padding is quite thick the restraints are good for long time bondage. Even after a few hours there were no sore parts or pressure marks. However this very much depends on the pair you are getting. The two leather covers and the padding are held together with a rugged leather piping. On the upper side on all my Ihsan restraints the single seam stitching creates a smooth transition to the leather cover. On the inner side of the restraint the piping is loose and thus sometimes creates a sharp or scraping edge which can lead to nasty scratches when heavily twisting while being tortured. I can only guess that the “better” stitching is on the outer side for good looks but in the end this is a toy not an accessory.