Fetters Full Sleeve Bondage Mitts

The Fetters Full Sleeve Bondage Mitts

Vendor: Regulation

Construction

Like on all Fetters leather bondage items, the first thing that strikes you is the strong and rich smell of high quality leather. Second, you will notice that like all bondage mitts from Fetters they are sold in pairs (it pains me that I have to point that out when looking at the competition…). The main body of each restraint is a 640mm long mitt made out of soft leather. The circumference at the top is 400mm which is large enough for most subs though body builders might want to get a custom version.

Detail of the Top D-ring

For about 2/3 of the body’s back there is a lacing to fetter the mitts tightly to the arm. The lacing using nylon string is strong enough for a tight fit and restricts the arm movement. Yet it is not strong enough to completely keep the elbow from bending. What really keeps the restraints bound to the arm are two 25mm wide bridle leather belts with roller buckles, one going around the wrist, the other going around the biceps sitting 70mm below the top of the mitts. The top strap is not riveted onto the body but runs to a pair of D-rings sitting, one on each side of the lacing. There are two more pairs, each 120mm apart. The wrist belt is riveted onto the mitt. On top of the mitts another strap is riveted perpendicular onto the belt. With this strap and two pairs of rivets a D-ring is housed at the bottom of the mitts. A final D-ring can be found on the top, next to the lacing.

Detail of the Bottom D-ring

Playing with the Full Sleeve Bondage Mitts

Through the size and the area these mitts cover, I consider them “body bondage” items. Putting them on a sub takes a bit of work and time. But it is also part of the fun with these restraints. In the process is also a sense of drama in it, taking away more and more the ability of his arms to move and letting him feel the contrast between the soft touch and tightening of the leather – especially if the sub has a leather fetish. Just like with the Bishop Head Harness, “ritualistically” putting the mitts on sets the moods and helps getting into headspace.

Through the D-ring layout, these mitts can naturally work as a cuff restraints substitute in almost any situation. Most fun was had by my testees in spread eagle position or when having their arms tied upwards laying in the sling. In this position the degree of bondage can easily be increased by connecting the D-rings to the sling chains.

Detail of the Lacing and the lateral D-ring pairs

But the full sleeve mitts really start to shine when you connect the top D-rings to a (bulldog) harness and leave the bed (room) with your sub. With just loosening the lacing a bit, adding a strap to connect the bottom D-rings and interconnecting the lateral D-rings on both mitts, you have a veritable straitjacket sleeve substitute. For a stricter layout with less wiggle room, tie the arms to the side using a full body bondage harness. Then thread a belt through the bottom D-rings and fasten it around the thighs and the leather gimp can (somewhat) walk about without moving his arms. Personally I enjoyed most using the Full Sleeve Bondage Mitts in a bondage frame. The many attachments points inside the frame in combination with the many D-rings enabled me to fetter a sub securely enough to flog him.

Detail of the Roller Buckles

Since I like the esthetics and the helplessness, I tried turning the full sleeve mitts into arm binder by connecting the bottom D-rings with a shackle and the other D-rings with belts. The layout worked but a word of caution is necessary: Do not tighten the belts too tightly or too quickly. Unlike restraints for this specific purpose like the Fetters Leather Arm Binder you can easily get to a degree of tension that puts too much stress on the shoulders and elbows or restricts blood flow to the hands. So if you are a fan of “tighter is better”, I highly recommend adding specific arm binder restraints to your collection. A safer (and what turned out more fun) way is running a piece of rope through both bottom D-rings and a D-ring at the bottom of a parachute with spikes. This will limit the arm movement too – sooner or later.

Detail of the Lower Roller Buckle is connected to the Botto, D-ring

Another setup a top testee did but I would not recommend it connecting the top D-rings to a collar. The chances of the sub strangling himself or causing disc injuries are too high in my opinion.

Of course, through the many D-rings, these bondage mitts are an ideal addition to rope bondage. The simplest ways is tying the top D-rings into a torso harness or the bottom ones to the thighs. But an experienced rigger will surely find more creative ways to make use of all the D-rings like body harness or tying two subs together a rope-inexperienced person like me cannot imagine.

If the mitts with the lacing are not strict enough, I recommend buying two 40cm – 50cm (depending on the leeway you want to allow) spreader bars. Connect one end to the bottom D-ring, the other to the two D-ring holding the biceps strap in place to severely limit the arm movement.