Vendor: Regulation
Sometimes a review takes strange ways until it gets published here. Last week I have gotten a message asking for my opinion in these two toys. Having been using them for years, I wanted to send him the link to the corresponding review. But it turns out: Despite having been using them for years, I have never reviewed them! Let’s fix that!
Construction
The design of the Scrotum Strap is quite simple: It is a 355mm long strap of belt leather. The lower 130mm length is 30mm wide, forming the body which then tapers to 220mm long and 15mm wide belt. Through the belt 7 holes with a 15mm center-to-center spacing are punched of which only 5 are usable. Onto the body a locking post and two 13mm wide d-rings under a slap of leather are riveted. Between the locking post and the first d-ring is a slot to thread the belt through. The Scrotum Strap comes with a pad lock.
The basic design is also reflected in the material and manufacturing: The belt leather is stiff and neither burnished nor deburred. This means the edges are sharp until the leather is well worn in which will take quite a while. Since I rarely use the Scrotum Strap due to having several other toys to choose from, mine is still stiff and a bit sharp. If you want to speed up the breaking in-process, rub a little bit of neatsfoot oil on it and knead the toy while watching TV.
The Weight Anchor Strap borrows the basic design idea of the Scrotum Strap but develops it further. The body of the toy is made out of two layers of soft garment leather. The height depends on which version you get: The one buckle which I have has a 33mm tall body, the two buckle a 56mm tall one. On each side of the body a 180mm long and 14mm wide strap of belt leather is riveted. At the bottom a Ø19mm welded o-ring is riveted.
It is closed around the balls about the same way as the Scrotum Strap. On top of one strap a 240mm long and 14mm wide belt is riveted perpendicularly, while on top of the other a small roller buckle is. The belt goes through a slot inside the body and thus grips around the cuff wrapping around the sack’s neck.
Just like on the previous toy, the manufacturing is a bit basic: The perpendicular edges of the body is just bare cut-off leather without any treatment, the slot is not whipped. Since both toys are basic CBT toys you can overlook these shortcoming but considering the price compared to a set of cuff-style restraints I would have expected more.
Playing with the Scrotum Strap & Weight Anchor Strap
As simple as the design is, it is ingenious: You wrap the body around the sack’s neck, thread the belt end through the slot and tighten it until you reach a snug yet comfortable fit. Then you thread the belt through the d-rings and close the toy by locking it onto the sub.
As long as the leather is not broken in, the adjustment process is cumbersome: Due to the stiffness it takes some adjustment to get it around the balls tightly. Threading it through the d-rings is a nightmare because of the friction. For me, this created a bit of a vicious cycle because I had easier to use toys which I then preferred and thus never broke the Scrotum Strap in.
This is a shame because it is a nifty little toy with much potential. The smallest diameter of it is 24mm, the largest 42mm so it covers a wide range of possible scrotums. As written above due to the position of the locking pin and one of the d-rings you cannot tighten it further than the third to last hole. A friend of mine has been using his Scrotum Strap for half a decade on a regular basis. It is broken in and thus soft. He uses it with some of his slave as a reminder of belonging by simply locking it around the balls for a day or so. Unlike a chastity cage, the Scrotum Strap will not impair any everyday activity but once locked cannot be taken off. So it is a nice, psychological reminder that someone else has control over you when a locked collar, wrist or ankle chain are not an option. If you are a bit of a sadist, locking the Scrotum Strap around your sub’s balls can speed up the breaking in process. The warmth and moisture of the junk in combination with the movement will soften the leather up over time. Until then, it will be uncomfortably to wear and create some abrasions and burns.
For more action oriented play, the Scrotum Strap is a secure and tight anchor point on the balls. So in a full body lockdown it can be used to tie even the balls in place. In more mobile settings, I like to connect the ankle restraints to it to restrict the sub’s movement. Of course this also works with wrist restraints but my favorite is connecting the Scrotum Strap with a Handlock for minimal slack wrist-to-ball restraints.
If you want to connect the Scrotum Strap with another restraint bear in mind since the belt is threaded through the d-rings the space between the apex and the belt is only 5mm! While this might be enough for a padlock, if you want to use carabiners use them together with shackles. Another alternative are folded nylon tension straps.
The Weight Anchor Strap attaches to the body the same ways as the previous toy: Thread the belt through the slot and around the body to the roller buckle. Since there is not friction and the ball cuff’s body is made out of soft leather that easily wraps around the scrotum, this is quite easy. On this toy you can use all the punched holes creating a internal diameter between 27mm and 42mm. If your sub has smaller or less meaty balls, you can punch additional holes to tighten the restraint even further. For meatier balls, you have to just give it a try since the body is very soft and only stiff in the middle where the belt runs around, I managed to put the toys even on bull balls.
The softness in combination with the wide range of adjustability enables a really secure fit that is comfortable over extended periods of time even the tug on the toy is big. As the name of the toy suggests, it is made for weights. Most people use parachutes for this kind of play but they are only good for so much pulling force. If you add a momentum by letting the weight swing, the snap fastener either pops open or a ball slips through the thin ring the parachute creates. This does not happen with the Weight Anchor Strap. Since it comfortably yet securely compresses the ball’s neck, it stays in plays up to weight amounts way beyond which is medically advisable (the maximum amount of weights I have suspended from a sub’s scrotum using this toy were 10+kg. Don’t try this at home!). If you want to use climbing carabiners instead of threading rope or tension straps through the o-ring, you will have create a larger opening using shackles like with the above reviewed toy.
The straps are riveted to slightly to the body that they don’t move. But they are long enough to allow for a pendulum movement. The movement stops quicker than on more freely hanging chains but the stiffness also transfers more of the kinetic energy onto the balls for an intense tug.
Of course you can also incorporate the Anchor Straps into bondage layouts by connecting them to restraints. But I found that the straps and the o-ring create more slack than the Scrotum Strap. But this is a very minor point of a toy hoarder. If you just have this one, it will perfectly work for tying down the balls or limit the subs movement by connecting either or both ankle and wrist restraints with this ball cuff.
Conclusion: Secure ball cuffs for heavy play | |||
Pro | Cons | Where to get | Price |
Secure fit even during hard play | Stiff leather which takes long to break-in | Regulation | £24 (Scrotum Strap) |
Adjustable to wide range of ball sized | Adjusting is a bit cumbersome | ||
Once broken in comfortable to wear over extended periods of time | Basic build quality |